Proto® TorquePlus™ J1131 Box End Wrench, 5/8 x 3/4 in Wrench, 12 Points, 15 deg Offset, 6-1/8 in OAL, Alloy Steel, Satin, ASME B107.100, AS954E S3.8.1
Proto® TorquePlus™ J1131 Box End Wrench, 5/8 x 3/4 in Wrench, 12 Points, 15 deg Offset, 6-1/8 in OAL, Alloy Steel, Satin, ASME B107.100, AS954E S3.8.1
-
BrandProto®
-
UPC662679060268
-
Manufacturer Part NumberJ1131
-
CountryUSA|Canada
-
Finish/CoatingSatin
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
Handle TypeOval/Short
-
Wrench Opening5/8 x 3/4 in
-
Wrench TypeDouble End, Spline
-
Number of Points12
-
Specifications MetASME B107.100, AS954E S3.8.1
-
Offset Angle15 deg
-
Overall Length6-1/8 in
-
Box End Thickness13/32 x 15/32 in
-
Box End Width1-27/32 x 1-3/32 in
- Satin finish provides corrosion resistance and a slip-resistant grip
- 12 point box end allow for fine indexing, helping to improve speed and access
- Fits 4, 6 and 12 point fasteners
- Box ends incorporate the TorquePlus™ system
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1AMN3 |
| Grainger | 1AMN3 |
| Grainger | 1AMN3 |
-
UNSPSC27111705
-
Package DescriptionEACH
-
Standards/ApprovalsAS954E S3.8.1
-
Catalog
Recently Viewed
Proto® TorquePlus™ J1131 Box End Wrench, 5/8 x 3/4 in Wrench, 12 Points, 15 deg Offset, 6-1/8 in OAL, Alloy Steel, Satin, ASME B107.100, AS954E S3.8.1
Proto® TorquePlus™ J1131 Box End Wrench, 5/8 x 3/4 in Wrench, 12 Points, 15 deg Offset, 6-1/8 in OAL, Alloy Steel, Satin, ASME B107.100, AS954E S3.8.1
1/2' X 9/16" 12-PT FULL POLISH 45/ OFFSET BOX WRENCH-ARS27167 >
Proto® TorquePlus™ J1126 Box End Wrench, 1/2 x 9/16 in Wrench, 12 Points, 15 deg Offset, 5-3/8 in OAL, Alloy Steel, Satin, ASME B107.100, AS954E S3.8.1
Proto® TorquePlus™ J1126 Box End Wrench, 1/2 x 9/16 in Wrench, 12 Points, 15 deg Offset, 5-3/8 in OAL, Alloy Steel, Satin, ASME B107.100, AS954E S3.8.1
Markal® 80359 200 Economical Wax Based Lumber Crayon, 1/2 in Hex Tip, Purple
CRIMPED WIRE CUP BRUSH-BSHWB521>
The Klein Tools Spud Wrench Holder features leather construction with 2 slots to accommodate up to 2 construction wrenches. The holder can be worn on a belt up to 2-Inch wide.
