GEARWRENCH® 85201 Double Box End Wrench, 5/16 x 3/8 in, 7/16 x 1/2 in Wrench, 12 Points, 0 deg Offset, 6.3 in OAL, High Alloy Steel, Polished Chrome
The GEARWRENCH QuadBox™ double box ratcheting wrenches give you 4 sizes on 1 wrench, reducing your tool count and making more space in your tool box. Each box end has two usable sizes, one on either side, and levers on either end to swap the wrench's ratcheting direction without removing the wrench. The ratcheting box end is designed to need as little as 5° of swing arc to move fasteners, versus 30° for standard wrenches. These wrenches are also made from a strong alloy steel with a bright, full polish chrome finish. Each ratcheting box end features an off-corner loading design for a better grip on the fastener and reduced fastener rounding. The 0° offset on both ends of the wrench provides greater access to fasteners in the tightest spaces.
-
BrandGEARWRENCH®
-
UPC099575852015
-
Manufacturer Part Number85201
-
CountryUSA|Canada
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
Box End Thickness0.47 x 0.59 in
-
Box End Width0.78 x 0.98 in
-
TypeDouble
-
Wrench Opening5/16 x 3/8 in, 7/16 x 1/2 in
-
Wrench TypeReversible, Ratcheting
-
Number of Points12
-
Offset Angle0 deg
-
Overall Length6.3 in
- QuadBox™ design saves weight in your toolbox by combining 4 sizes on one wrench
- Off-corner loading design on box end provides better grip and reduces fastener rounding
- Flush mounted reversing levers allows you to change direction without removing the wrench
- Manufactured from alloy steel for better strength and longer tool life
- Bright, full polish chrome finish easily wipes clean and resists corrosion
- 72-tooth ratcheting box end needs a minimal 5 deg to move fasteners versus 30 deg for standard wrenches
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 24U641 |
| MSC | 75230565 |
| Fastenal | 0238772 |
-
UNSPSC27111753
-
Package DescriptionEACH
-
WarrantyLimited Lifetime
Recently Viewed
GEARWRENCH® 85201 Double Box End Wrench, 5/16 x 3/8 in, 7/16 x 1/2 in Wrench, 12 Points, 0 deg Offset, 6.3 in OAL, High Alloy Steel, Polished Chrome
The GEARWRENCH QuadBox™ double box ratcheting wrenches give you 4 sizes on 1 wrench, reducing your tool count and making more space in your tool box. Each box end has two usable sizes, one on either side, and levers on either end to swap the wrench's ratcheting direction without removing the wrench. The ratcheting box end is designed to need as little as 5° of swing arc to move fasteners, versus 30° for standard wrenches. These wrenches are also made from a strong alloy steel with a bright, full polish chrome finish. Each ratcheting box end features an off-corner loading design for a better grip on the fastener and reduced fastener rounding. The 0° offset on both ends of the wrench provides greater access to fasteners in the tightest spaces.
10-POCKET ELECTRICIANS TOOL POUCH-KLE5190 >
Markal® 086562 Thermomelt® Temperature Indicator, 250 deg F, 3/8 in Flat Tip
Thermomelt® HEAT-STIK® markers are a quick, low-cost method to accurately measure surface temperatures of various metals and equipment. Available in 88 Fahrenheit and 32 Centigrade temperatures, the stick-in-holder design provides convenience and durability for long-lasting use in the workshop or in the field.
Selkirk® by Duravent Ultra-Temp® 208800 Type HT Round Top, Fits Duct Size: 10 in, 16 in W x 7 in H Cap
Part of the chimney system roof assembly, the Round Top is designed with a dome to exclude rain and leaves and a lower skirt to deflect wind for proper chimney draft. In the Sure-Temp-Type HT Chimney (5, 6, 7 and 8 in sizes) the Round Top is designed with three legs that slide down over the outside of the chimney. A cinch band is then positioned over the legs and tightened to hold the top firmly in place. This design makes cap removal for cleaning a breeze. In the 10, 12 and 14 in sizes, the Round Top is designed with a squeeze collar that fits inside the chimney pipe. The squeeze collar expands as a set screw is tightened to hold the top firmly in place.
Klein® 68206 Standard Box Wrench, 13/16 x 7/8 in Wrench, 12 Points, 9-1/4 in OAL, Polished Chrome
The Klein Tools Ratcheting Box Wrench is great for working in confined spaces and on long studs. This wrench has a different size opening on each end for multiple applications. Get reverse ratcheting action simply by turning the wrench over.
Markal® 080224 B® Paintstik® Solid Paint Crayon, 11/16 in Round Tip, Orange
