Armstrong® 27-511 Double Extra Long Length Box End Wrench, 7/16 in Wrench, 12 Points, 0/15 deg Offset, 7.3 in OAL, Forged Alloy Steel, Polished Chrome
Armstrong® 27-511 Double Extra Long Length Box End Wrench, 7/16 in Wrench, 12 Points, 0/15 deg Offset, 7.3 in OAL, Forged Alloy Steel, Polished Chrome
-
BrandArmstrong®
-
UPC781412275117
-
Manufacturer Part Number27-511
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialForged Alloy Steel
-
Measurement SystemImperial
-
TypeDouble Extra Long Length
-
Handle TypeFlat/Standard
-
Wrench Opening7/16 in
-
Number of Geared Teeth72
-
Wrench TypeRatcheting
-
Number of Points12
-
Offset Angle0/15 deg
-
Overall Length7.3 in
-
Box End Thickness0.303 x 0.272 in
-
Box End Width0.835 x 0.717 in
- Ratcheting box end incorporates a 72 tooth precision machined gear for a 5 deg swing arc
- Enclosed ratcheting box end adds strength by reducing dirt and debris infiltration
- Thin walled, low profile ratcheting box end allows easier access to confined fasteners
- Both the ratcheting box end and fixed box end incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Ratcheting box end/fixed box end design on one wrench provides speed with the ratcheting box end, strength for breaking loose stubborn fasteners with the fixed box end
- Fixed box end is offset 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- One piece wrench forging provides superior strength and durability over 2-piece laminate designs
- Extra long length to increase leverage and torque, especially useful with the fixed box end
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 03193703 |
-
UNSPSC27111753
Recently Viewed
Armstrong® 27-511 Double Extra Long Length Box End Wrench, 7/16 in Wrench, 12 Points, 0/15 deg Offset, 7.3 in OAL, Forged Alloy Steel, Polished Chrome
Armstrong® 27-511 Double Extra Long Length Box End Wrench, 7/16 in Wrench, 12 Points, 0/15 deg Offset, 7.3 in OAL, Forged Alloy Steel, Polished Chrome
375-WATT POWER INVERTER-PRIPV375 >
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY
-ANR150015 >
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
HCI Preferred Supplier 10024 Reducing Short Rod Nut, 1/2 x 3/8 in Nominal, SAE Flare Threaded UNF, Brass
HCI Preferred Supplier 10024 Reducing Short Rod Nut, 1/2 x 3/8 in Nominal, SAE Flare Threaded UNF, Brass
3/8" CUT COLD CHISEL 5/16" HEX - ALL25651 >
