Armstrong® 26-706 Long Length Box End Wrench, 11/16 x 3/4 in Wrench, 12 Points, 15 deg Offset, 11.188 in OAL, High Alloy Steel, Full Polished, ASME B107.6-1994
Armstrong® 26-706 Long Length Box End Wrench, 11/16 x 3/4 in Wrench, 12 Points, 15 deg Offset, 11.188 in OAL, High Alloy Steel, Full Polished, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412267068
-
Manufacturer Part Number26-706
-
CountryUSA
-
Finish/CoatingFull Polished
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeLong Length
-
Handle TypeFlat
-
Wrench Opening11/16 x 3/4 in
-
Wrench TypeOffset
-
Number of Points12
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Overall Length11.188 in
-
Box End Thickness0.406 x 0.453 in
-
Box End Width1 x 1.062 in
- Both box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Two different size openings on opposite ends provides broader coverage than a combination wrench, less wrenches to carry
- Box ends are offset 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 00482521 |
-
UNSPSC27111705
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
-
Catalog
Recently Viewed
Armstrong® 26-706 Long Length Box End Wrench, 11/16 x 3/4 in Wrench, 12 Points, 15 deg Offset, 11.188 in OAL, High Alloy Steel, Full Polished, ASME B107.6-1994
Armstrong® 26-706 Long Length Box End Wrench, 11/16 x 3/4 in Wrench, 12 Points, 15 deg Offset, 11.188 in OAL, High Alloy Steel, Full Polished, ASME B107.6-1994
HCI Preferred Supplier 300-F-SS Cam and Groove Fitting, 3 in Nominal, Male Adapter x MNPT End Style, 316 Stainless Steel
Dixon® 300-F-SS Boss-Lock™ Type F Cam and Groove Adapter, 3 in, Male Adapter x MNPT, 316 Stainless Steel
MORSE® 10558 1314 General Purpose Taper Length Drill, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 5-1/8 in OAL, HSS, Black Oxide
6" CRIMPED WIRE WHEEL-WEI35105 >
16 GROOVE, 1/2" PITCH, 2.492 - OUTSIDE DIMENSIONS TIMING BELT IDLERS-BRWN16H200IDLER >
IDC Select 13-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-13-F-1-1/4
IDC Select® offers a wide range of high quality roller chain sprockets produced in ISO certified facilities to ANSI standards. Plain bore, finished bore, taper and QD® bushing designs are available. All IDC Select® sprockets come with hardened teeth and black oxide finish for long lasting service life. The finished bore design comes complete with a keyway on the centerline of the sprocket tooth and two setscrews, one over the keyway and one at 90 deg.
