Armstrong® 27-466 Long Length Box End Wrench, 1-1/16 x 1-1/8 in Wrench, 12 Points, 45 deg Offset, 17 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 27-466 Long Length Box End Wrench, 1-1/16 x 1-1/8 in Wrench, 12 Points, 45 deg Offset, 17 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412274660
-
Manufacturer Part Number27-466
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeLong Length
-
Wrench Opening1-1/16 x 1-1/8 in
-
Wrench TypeOffset
-
Number of Points12
-
Specifications MetASME B107.6-1994
-
Offset Angle45 deg
-
Overall Length17 in
-
Box End Thickness0.688 x 0.718 in
-
Box End Width1.5 x 1.562 in
- Both box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Two different size openings on opposite ends provides broader coverage than a combination wrench, less wrenches to carry
- Box ends are offset 45 deg for clearing large obstructions, reaching recessed fasteners and knuckle clearance on flat surfaces
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 70364443 |
-
UNSPSC27111705
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
Recently Viewed
Armstrong® 27-466 Long Length Box End Wrench, 1-1/16 x 1-1/8 in Wrench, 12 Points, 45 deg Offset, 17 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 27-466 Long Length Box End Wrench, 1-1/16 x 1-1/8 in Wrench, 12 Points, 45 deg Offset, 17 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Porter-Cable® 43451 Pattern Cutting Laminate Trim Bit, 5/16 in Dia Cutting, 2-21/32 in OAL, 3/4 in D Cutting, 1/4 in Dia Shank, Carbide
V-826 KEYED DRAWER LOCKS-NTL183772 >
MORSE® 91466 1330G General Purpose Jobber Length Drill Bit, P Drill - Letter, 0.323 in Drill - Decimal Inch, 118 deg Point, HSS, TiN Coated
BRASS GAS FITTING3/8" OD TUBEX1/2" FEMALE IPS-JWH414769 >
1" X 2" USS GR-5 Hex Head Capscrew
