M-1-P-08 APEX/COOPER TOOL PRODUCTS
1/4" X 7/8" FOR SELF DRILLING & TAPPING SCREWS 6-PT DRIVE SOCKET-APXM1P08 >
Recently Viewed
1/4" X 7/8" FOR SELF DRILLING & TAPPING SCREWS 6-PT DRIVE SOCKET-APXM1P08 >
Proto® J5414S Standard Length Socket, Imperial, 1/2 in Square Drive, 7/16 in
Proto® TorquePlus™ J4712M Standard Length Socket, Metric, 1/4 in Square Drive, 12 mm
Proto® TorquePlus™ J4712M Standard Length Socket, Metric, 1/4 in Square Drive, 12 mm
Milwaukee® 48-20-5050 Heavy Duty Thin Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6160 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
Proto® TorquePlus™ J07524M Standard Length Socket, Metric, 3/4 in Square Drive, 24 mm
Proto® TorquePlus™ J07524M Standard Length Socket, Metric, 3/4 in Square Drive, 24 mm
