metabo® 674720000 Pro 4 2-Cutter Hammer Drill Bit, 5/8 in Drill Bit, Chisel Cutting, SDS-Plus® Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
metabo® 674720000 Pro 4 2-Cutter Hammer Drill Bit, 5/8 in Drill Bit, Chisel Cutting, SDS-Plus® Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
-
Brandmetabo®
-
UPC662911876107
-
Manufacturer Part Number674720000
-
CountryUSA
-
MaterialCarbide
-
Flute Length16 in
-
Flute TypeSpiral
-
Type2-Cutter
-
Applicable MaterialsConcrete
-
SeriesPro 4
-
Cutting Depth16 in
-
Cutting Edge MaterialCarbide
-
Shank TypeSDS-Plus®
-
Drill Bit Cutting ShapeChisel
-
Drill Bit Size5/8 in
-
Overall Length18 in
- Unique tip design provides easy centering and fast drilling
- Chisel-shaped bit head penetrates material rapidly
- Multi-fluted spiral shaft quickly removes concrete dust from the hole for faster drilling and longer bit life
- Reinforced flute geometry reduces vibration and transfers more impact power to the tip, further enhancing drilling speed and life expectancy
-
UNSPSC20111603
-
Specification Sheet
Recently Viewed
metabo® 674720000 Pro 4 2-Cutter Hammer Drill Bit, 5/8 in Drill Bit, Chisel Cutting, SDS-Plus® Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
metabo® 674720000 Pro 4 2-Cutter Hammer Drill Bit, 5/8 in Drill Bit, Chisel Cutting, SDS-Plus® Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
7-PC BLACK COMBINATION WRENCH SET - ALL29014B >
9-1/2" CUSH/GRIP LINEMAN PLIERS-ARS67069>
10" TONGUE/GROOVE PLIER-KLED50210>
Milwaukee® 48-20-5050 Heavy Duty Thin Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6160 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
