Pin Installation & Removal Punches
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 8mm (5/16") Diameter.
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 5mm (3/16") Diameter.
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 9.5mm (3/8") Diameter.
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 3mm (1/8") Diameter.
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 6mm (1/4") Diameter.
Proto® J48516 1-Piece Super Duty Drive Pin Punch, Parabolic, 5/16 in, 6-1/4 in OAL, Steel
Proto Tools 7/32" TIP DRIVE PIN PUNCHES PRO J-47-7/16 X 7/32
Proto® Ergonomics™ J477/16X7/32 1-Piece Drive Pin Punch, Parabolic, 7/32 in, 6-3/8 in OAL, Steel
Proto Tools 5/32"-TIP DRIVE PIN PUNCHES PRO J-47-5/16 X 5/32
Proto® Ergonomics™ J475/16X5/32 1-Piece Drive Pin Punch, Parabolic, 5/32 in, 5-9/16 in OAL, Steel
Proto® J48532L 1-Piece Long Super Duty Drive Pin Punch, Parabolic, 5/32 in, 8 in OAL, Steel
Proto Tools 5/16"-TIP X 8"-LENGTH PIN PUNCHES PRO J-48516-L
Proto® J48516L 1-Piece Long Super Duty Drive Pin Punch, Parabolic, 5/16 in, 8 in OAL, Steel
Proto® J48038 1-Piece Super Duty Drive Pin Punch, Parabolic, 3/8 in, 6-1/2 in OAL, Steel
Proto® J48332 1-Piece Super Duty Drive Pin Punch, Parabolic, 3/32 in, 4-1/2 in OAL, Steel
Proto Tools 3/32"-TIP DRIVE PIN PUNCHES PRO J-47-1/4 X 3/32
Proto® Ergonomics™ J471/4X3/32 1-Piece Drive Pin Punch, Parabolic, 3/32 in, 4-3/4 in OAL, Steel
Proto Tools 3/16"-TIP X 5-1/4" DRIVE PIN PUNCH PRO J-48316
Proto® J48316 1-Piece Super Duty Drive Pin Punch, Parabolic, 3/16 in, 5-1/4 in OAL, Steel
Proto Tools 3/16"-TIP DRIVE PIN PUNCHES PRO J-47-3/8 X 3/16
Proto® Ergonomics™ J473/8X3/16 1-Piece Drive Pin Punch, Parabolic, 3/16 in, 5-7/8 in OAL, Steel
Proto® Ergonomics™ J475/16X1/8 1-Piece Drive Pin Punch, Parabolic, 1/8 in, 5-3/16 in OAL, Steel
Proto® J48018 1-Piece Super Duty Drive Pin Punch, Parabolic, 1/8 in, 4-3/4 in OAL, Steel
Proto Tools 1/4"-TIP X 7" DRIVE PIN PUNCHES PRO J-47-1/2 X 1/4
Proto® Ergonomics™ J471/2X1/4 1-Piece Drive Pin Punch, Parabolic, 1/4 in, 6-3/4 in OAL, Steel
Proto® J48014 1-Piece Super Duty Drive Pin Punch, Parabolic, 1/4 in, 5-3/4 in OAL, Steel
Proto® J48116 1-Piece Super Duty Drive Pin Punch, Parabolic, 1/16 in, 4-1/8 in OAL, Steel
Proto Tools 1/16"-TIP DRIVE PIN PUNCHES PRO J-47-1/4 X 1/16
Proto® Ergonomics™ J471/4X1/16 1-Piece Drive Pin Punch, Parabolic, 1/16 in, 4-3/8 in OAL, Steel
Klein Tools Barrel-Type Drift Pins are manufactured for durability. They are machined from quality alloy steel, which is forged and heat-treated for strength. The tough, drop-forged steel will properly end-pein in use.
Klein Tools Barrel-Type Drift Pins are manufactured for durability. They are machined from quality alloy steel, which is forged and heat-treated for strength. The tough, drop-forged steel will properly end-pein in use.
Klein Tools Barrel-Type Drift Pins are manufactured for durability. They are machined from quality alloy steel, which is forged and heat-treated for strength. The tough, drop-forged steel will properly end-pein in use.
Recently Viewed
Browning® 3695491 Type B Split-Taper Bushing, 60 mm Dia Bore, 2.557 in Dia Small End/2-5/8 in Dia Large End Dia Barrel, 3.688 in Dia Flange, 1.938 in OAL, Ductile Iron or Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
3/4" PVC ELECTRICAL CONNECTOR-ELENMLT75 >
Greenlee® Kwik Stepper® 34411 Multi-Hole Step Bit, 7/8 in Dia Max Hole, 1 Step, Steel, 1 Hole Size, 3/8 in Shank
Greenlee® Kwik Stepper® 34411 Multi-Hole Step Bit, 7/8 in Dia Max Hole, 1 Step, Steel, 1 Hole Size, 3/8 in Shank
HOOK UTILITY KNIFE BLADES--PK/5-STA11961 >
Milwaukee® 49-36-0402 Backing Plate, For Use With M18 FUEL™ 15mm, 21mm Random Orbital Polishers
The MILWAUKEE® Hook & Loop attachment method of this 6” Backing Plate means that any Hook & Loop enabled polishing pad can be used with the backing plate, giving you a greater level of freedom in selecting your accessories. The Milwaukee 6” Backing Plate is designed for use with MILWAUKEE® M18 FUEL™ 15mm Random Orbital Polisher, but it has also been optimized for use with the M18 FUEL™ 21mm Random Orbital Polisher. The 6” Backing Plate can be interchanged between the two polishers as needed based on application requirements. The durable rubber design aids in the dispersion of heat in application which prolongs the life of the backing plate itself, saving our users both time and money.
4" X 3/4" ULTRA-LOK HOSE CLAMP 201SS-BNDUL-2139 >
