Proto Tools 5/32" SUPER-DUTY LONG PIN PUNCH PRO J-48532-L
Proto® J48532L 1-Piece Long Super Duty Drive Pin Punch, Parabolic, 5/32 in, 8 in OAL, Steel
-
BrandProto®
-
UPC662679010874
-
Manufacturer Part NumberJ48532L
-
CountryUSA|Canada
-
Tip MaterialSteel
-
Tip Size5/32 in
-
Punch TypeParabolic
-
Type1-Piece Long Super Duty
-
Handle MaterialSteel
-
Overall Length8 in
- 1-piece design for strength and durability
- Reverse taper to help prevent binding
- Modified parabolic striking end to help reduce mushrooming and chipping
- Made from S2 steel and specially heat treated for greater strength and durability
- Black oxide finish to help prevent rust corrosion, extending tool life and performance
- A polished identification panel on one of the flats is marked with the tool number and size in a black inlay
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4260845 |
| Berkshire eSupply | KP4260845 |
-
UNSPSC27111505
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.410|ASME B107.48
-
Catalog
Recently Viewed
Proto® J48532L 1-Piece Long Super Duty Drive Pin Punch, Parabolic, 5/32 in, 8 in OAL, Steel
Proto® TorquePlus™ J1065M Box End Wrench, 17 x 19 mm Wrench, 12 Points, 7.5 deg Offset, 11 in OAL, Alloy Steel, Full Polished, ASME B107.100, AS954E S3.8.1
GP® 1908F 7-Piece Socket Driver Bit, 3/8 in Hex Drive, 1/4 in, 0.63 in L Bit
GP® 1908F 7-Piece Socket Driver Bit, 3/8 in Hex Drive, 1/4 in, 0.63 in L Bit
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
RCSM-B-3/4/65 INA BEARING COMPANY
3/4"-ID HVAC BEARINGS-INARCSMB3/4/65>
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
