Centering & Marking Punches
The Starrett 117 Center Punch is made of specially selected steel, hardened and properly tempered. It is well proportioned, nicely finished and has a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. 4" (100mm) Length, 1/8" (3mm) Point Diameter.
Starrett® 18A Automatic Center Punch With Adjustable Stroke, 9/16 in Tip, 5 in OAL, Steel Tip
The Starrett Automatic Center Punch with Adjustable Stroke features a lightweight, knurled steel handle for a positive grip and easy handling. 125mm (5") Length, 14mm 9/16" Diameter.
Starrett® 18AA Automatic Center Punch With Adjustable Stroke, 7/16 in Tip, 4 in OAL, Steel Tip
The Starrett Automatic Center Punch with Adjustable Stroke features a lightweight, knurled steel handle for a positive grip and easy handling. 100mm (4") Length, 11mm (7/16") Diameter.
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 1.5mm (1/16") Diameter.
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 2.5mm (3/32") Diameter.
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 3mm (1/8") Diameter.
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 5mm (3/16") Diameter.
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 5.5mm (7/32") Diameter.
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 6mm (1/4") Diameter.
Starrett® 818 Automatic Center Punch With Adjustable Stroke, 5/8 in Tip, 5 in OAL, Steel Tip
Starrett® 818 Automatic Center Punch With Adjustable Stroke, 5/8 in Tip, 5 in OAL, Steel Tip
Recently Viewed
SINGLE SHEAVE FIXED EYE BLOCK, 2" X 2-1/2" , SAFE WORKLOAD 685LBS.-BLK02568 >
FLAT MOUNT BLOCKS-BLK03558>
Milwaukee® 48-20-9010 SHOCKWAVE™ Single Ended Hammer Drill Bit, 1/4 in Drill Bit, 1/4 in Hex Shank, 2 in D Cutting, Carbide Cutting Edge, 4 in OAL
The MILWAUKEE® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.
Milwaukee® 48-25-3001 Heavy Duty Standard Self-Feed Bit, 3 in Dia, 6 in OAL, 7/16 in Shank
Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. Two feed screws are included.
Milwaukee® 48-20-8026 M/2™ 2-Cutter Rotary Hammer Drill Bit, 6 mm Drill Bit, Spear Cutting, 3/8 in SDS-Plus Shank, 250 mm D Cutting, Carbide Cutting Edge, 310 mm OAL
Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Bostitch® STCR50199/16-1 STCR 2619 Heavy Duty Staples, 9/16 in L Leg, Chisel Point, High Carbon Steel, 7/16 in W Crown
Each fastener is engineered for optimal performance. 9/16" Power Crown Staple. Comes with 1,000 per pack. Fits Bostitch #PC1000, #PC2K, #PC4000, #PC5000, #H30-8, True Value #803-745 and #T5-8 Staplers. Comes with 1,000 staples per pack. Has a rugged, coated finish which strengthens and protects the nail from rust and decay. Made with the highest quality.
