Mayhew 30" X 1" STEEL LINE-UP/PRY BARS MAY 75004
Mayhew™ 75004 Pry Bar Steel Line Up Pry Bar, Tapered Tip, 30 in OAL, Steel
-
BrandMayhew™
-
UPC45256750040
-
Manufacturer Part Number75004
-
CountryUSA
-
FinishBlack Oxide
-
MaterialSteel
-
Tip TypeTapered
-
TypePry Bar
-
Diameter7/8 in
-
Overall Length30 in
-
Overall Width1 in
-
Package DescriptionEACH
Recently Viewed
Mayhew™ 75004 Pry Bar Steel Line Up Pry Bar, Tapered Tip, 30 in OAL, Steel
901-1.5 1-1/2" 6-40 Gal Per Minute Flow Meter. This Pump Should Be Used For Short Periods Of Time--not Over 30 Minutes-tut9011.
1-1/2" 6-40 GAL PER MINUTE FLOW METER. THIS PUMP SHOULD BE USED FOR SHORT PERIODS OF TIME--NOT OVER 30 MINUTES-TUT9011.5 >
ITM 807AK0011 Conical Anchor Kit, 1/4 inch Slow Spiral Masonry, Blue
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
K-57 Septic System Cleaner is a powerful biological product which is formulated with our patented bacterial cultures. K-57 is powerful enough to act quickly in emergency situations where sluggish conditions, clogs, surface water accumulations, or back-ups have occurred. Over the last 50 years, K-57 has seen it all regarding septic system problems and has restored countless systems to useful working order. If your system is giving you trouble, get Roebic K-57 and get it done.
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
