RIDGID® 32900, 246 Ratchet Action Soil Pipe Cutter, 1-1/2 to 6 in
The RIDGID® 206 and 246 Soil Pipe Cutters utilize an integral ratchet handle centered on the pipe. This is especially useful when cutting pipe in trenches, and helps keep the width of the trench to a minimum. Both use a unique hooking mechanism to make hooking the chain easier. The 206 uses the same chain as the 226 and 276, while the chain on the 246 is larger and allows it to cut 4 in class 22 water main and 2 to 5 in extra heavy duty soil pipe.
-
BrandRIDGID®
-
UPC095691329004
-
Manufacturer Part Number32900
-
CountryUSA
-
FinishRed
-
TypeRatchet Action
-
Handle MaterialSteel
-
Nominal Capacity1-1/2 to 6 in
-
Applicable MaterialsCast Iron, Cement and Clay Pipe
-
Body MaterialForged Steel
-
Overall Length33-1/4 in
- Cuts 1-1/2 to 6 in clay, cast iron clay pipe or cement pipe and 4 in class 22 water main
- Ratchet-action handle parallel to pipe allows for application in minimum width trenches
- Complete with hand guard to protect operator's knuckles when cutting
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 6YJ36 |
| Ferguson | R32900 |
-
Alternative Part Number246
-
UNSPSC99999999
-
Package DescriptionEACH
-
WarrantyLifetime
-
Warranty Information
Recently Viewed
The RIDGID® 206 and 246 Soil Pipe Cutters utilize an integral ratchet handle centered on the pipe. This is especially useful when cutting pipe in trenches, and helps keep the width of the trench to a minimum. Both use a unique hooking mechanism to make hooking the chain easier. The 206 uses the same chain as the 226 and 276, while the chain on the 246 is larger and allows it to cut 4 in class 22 water main and 2 to 5 in extra heavy duty soil pipe.
POLYPROYLENE MOLDED PARTS. PUSH AND FOLD DOWN BASE TO REMOVE PAD. EASILY PICKS UP DUST AND ALLERGENS
-JWH600254>
5-GAL NO-LID WHITE PAINT PAILS-JWH782920>
2-11/16"-ID X 2-7/8"-OD VITON O-RING
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
1-OZ BLUE PAINT COLORANT-BLPE >
