RIDGID® 36127 Model 412M Lever Bender, 180 deg
RIDGID® 36127 Model 412M Lever Bender, 180 deg
-
BrandRIDGID®
-
UPC095691361271
-
Manufacturer Part Number36127
-
CountryUSA
-
Handle TypeOffset Cushion Grip
-
Nominal Capacity12 mm
-
Applicable MaterialsAnnealed Copper, Steel and Stainless
-
SeriesModel 412M
-
Bend Angle180 deg
-
Bend Radius38 mm
- Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06 in (1.5 mm) to a maximum of 180 deg
- Offset cushion grip handles for comfort when forming 180 deg bends
- A 90 deg start angle and unique oil-absorbing shoe minimize bending effort while forming accurate bends
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 395P61 |
-
UNSPSC99999999
-
Package DescriptionEACH
-
WarrantyLifetime
-
Warranty Information
Recently Viewed
RIDGID® 36127 Model 412M Lever Bender, 180 deg
85144 SAIT/UNITED ABRASIVE PRODUCTS 20 Inch X 2 Inch Floor Sanding Disc 40 Grit Silion Carbide Grain
Silicon carbide grain
Closed coat for more material removal
Excellent for general refinishing
3/4" X 2" PVC NIPPLE-JWH439948 >
SM SSN402.0X03.0 Nipple
Precision Brand® 16AN10 Flat Sheet Shim Stock, 1008-1010 Full Hard Steel, 18 in L x 6 in W x 0.01 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Precision Brand® 16A3 Shim Stock, 1008-1010 Full Hard Steel, 100 in Roll L x 6 in W x 0.003 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
