RIDGID® 44852 456 Tri-Bender, 90 deg
Greenlee’s High Performance and Double Braided cable pulling rope offer both strength and durability. Select a rope with a maximum rated capacity that meets or exceeds the tugger's maximum pulling force.
-
BrandRIDGID®
-
UPC095691448521
-
Manufacturer Part Number44852
-
CountryUSA
-
Nominal Capacity3/8 in
-
Bend Angle90 deg
-
Bend Radius1.01 in
-
Overall Length8-1/2 in
- Designed to easily bend three different sizes of soft copper tubing with the same tool
- Ideal for plumbing and HVAC applications
- A 90 deg start angle minimizes effort required to form a bend
- Handy reference marks indicate the angle for quick bends through 90 deg
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1ATH9 |
-
Alternative Part Number456
-
UNSPSC99999999
-
Package DescriptionEACH
-
WarrantyFull Lifetime
-
Warranty Information
Recently Viewed
Greenlee’s High Performance and Double Braided cable pulling rope offer both strength and durability. Select a rope with a maximum rated capacity that meets or exceeds the tugger's maximum pulling force.
3-WIRE ARMORED ELECTRIC PLUG-JWH512430 >
Milwaukee® 4096 Diamond Coring Motor With Clutch, 450 to 900 rpm Speed, 4.8 hp, 120 VAC, Metal Housing, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4096 has a clutch to protect gears and motor against overload. This unit will handle core bits from 2 in. to 10 in. in diameter.
BI-PIN FLUOR/LAMPHOLDERS--CD/2-JWH521910>
3/4" -IDEX TENDED SPIRAL RETAINING RING-GLHRST075 >
Greenlee® 925-1-3/4 Ultra Hole Saw With Fixed Pockets, 1-3/4 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor
Greenlee® 925-1-3/4 Ultra Hole Saw With Fixed Pockets, 1-3/4 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor
