Browning 22-TOOTH 8-PITCH SPUR GEARS BRW YS-S-8-22
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289256723
-
Manufacturer Part Number1219161
-
CountryUSA
-
Face Width1-1/2 in
-
Pitch Diameter2-3/4 in
-
MaterialSteel
-
Pressure Angle20 deg
-
Gear Ratio1:1
-
TypeMinimum Plain Bore Type 2
-
Hub Diameter2-3/8 in
-
Hub Projection7/8 in
-
Diametral Pitch8
-
Number of Teeth22
-
Outside Diameter3 in
-
Bore Diameter7/8 to 1-1/2 in
-
Overall Length2-3/8 in
- Browning® Split-Taper® bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
- Without hardened teeth
- Browning Gears are rated in accordance with AGMA standards
- When you think Special Gears - Think Browning
-
Alternative Part NumberYSS822
-
UNSPSC31171707
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
-
Warranty Information
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
BBI 087426 Fully Threaded Cap Screw, 5/8-11, 1-1/4 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
5/8" X 1-1/4" USS GR-5 Hex Head Capscrew
Koyo B-1416-OH Inch Series Open Ends Uncaged Drawn Cup Needle Roller Bearing With Oil Hole, 7/8 in Dia Bore, 1-1/8 in OD, 1 in W, 7100 lbf Dynamic/14570 lbf Static Load
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
3/8" STRAIGHT SQUEEZE ELECTRICAL CONNECTOR-ELEL42 >
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
