Browning 36-TOOTH 6-PITCH SPUR GEARS BRW NS-S-6-36
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289124107
-
Manufacturer Part Number1212778
-
CountryUSA
-
Face Width1-1/2 in
-
Pitch Diameter6 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore
-
Hub Diameter3-1/4 in
-
Hub Projection1 in
-
Diametral Pitch6
-
Number of Teeth36
-
Outside Diameter6.33 in
-
Bore Diameter1-1/8 in
-
Overall Length2-1/2 in
- Browning® split taper bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Helical gears are quieter than spur gears and give maximum smoothness on parallel shafts
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
-
Alternative Part NumberNSS636
-
UNSPSC31171707
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Koyo HJ-182616 Inch Series Caged Heavy Duty Needle Roller Bearing, 1-1/8 in Dia Bore, 1-5/8 in OD, 1 in W, 8170 lbf Dynamic/12100 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
2" -ID 2-BOLT FLANGE UNIT-MBUVF2E232 >
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
1-15/16" -ID 2-BOLT FLANGE UNIT-MBUVF2E231 >
BEARING ADAPTER METRIC LOCK WASHER - SNRMB16>
