Browning® 1213222 Minimum Plain Bore Type 4 Spur Gear, 4 Diametral Pitch, 14.5 deg Pressure Angle, 2 in W Face, 44 Teeth, 11 in Dia Pitch, 1-1/4 to 2-5/8 in Dia Bore, Cast Iron
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289274673
-
Manufacturer Part Number1213222
-
CountryUSA
-
Face Width2 in
-
Pitch Diameter11 in
-
MaterialCast Iron
-
Pressure Angle14.5 deg
-
Gear Ratio1:1
-
TypeMinimum Plain Bore Type 4
-
Hub Diameter4-1/4 in
-
Hub Projection1-1/2 in
-
Diametral Pitch4
-
Number of Teeth44
-
Outside Diameter11-1/2 in
-
Bore Diameter1-1/4 to 2-5/8 in
-
Overall Length3-1/2 in
- Helical Gears are quieter than spur gears and give maximum smoothness on parallel shafts
-
Alternative Part NumberNCS444
-
UNSPSC31171707
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Warranty Information
-
Catalog
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
8 GROOVE BANDED B50 V-BELTS-PIXB50/08>
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Browning® 3546991 TGC Cam Detent Mini Straight Bushing Overload Clutch, 1/2 in Dia Bore, 3.15 in OD, 23 to 56 in-lb Torque, 2.36 in OAL
The Browning® Torq/Gard® overload clutches are one of the most popular torque overload devices that power transmission solutions offers. A spring loaded cam follower seated in a single hub cam detent cause the hub and clutch to rotate together. Therefore, the clutch always resets in the same position if tripped, staying in phase. They can be turned in both directions by design. After tripping, the unit automatically resets when it returns to the set position. This is usually performed by jogging the machine after the jam or overload is cleared. Shaft bushings are used to accommodate a standard maximum bore unit to the application shaft requirement. Torque capacity up to 8000 in-lb and speed ranges from 350 to 1800 rpm.
PX-80-TL-2012 Dodge® Para-Flex® 10604 Type H Flange Assembly, 2-1/8 in Dia Bore, 8.38 in OD, 1-1/4 in L Through Bore, Cast Iron
Dodge® Para-Flex® 10604 Type H Flange Assembly, 2-1/8 in Dia Bore, 8.38 in OD, 1-1/4 in L Through Bore, Cast Iron
