Browning 80-TOOTH 20-PITCH SPUR GEARS BRW NS-S-20-80
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289122004
-
Manufacturer Part Number1210806
-
CountryUSA
-
Face Width3/8 in
-
Pitch Diameter4 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
Gear Ratio1:1
-
TypeMinimum Plain Bore Type 2
-
Hub Diameter1.813 in
-
Hub Projection1/2 in
-
Diametral Pitch20
-
Number of Teeth80
-
Outside Diameter4.1 in
-
Bore Diameter1/2 to 1 in
-
Overall Length7/8 in
- Browning® Split-Taper® bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
- Without hardened teeth
-
Alternative Part NumberNSS2080
-
UNSPSC31171707
-
Package Description1/PK
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
-
Warranty Information
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
93X3/4" 10/14 TOOTH BANDSAW BLADE-LAS3/4X93X10/14T >
Koyo HJ-324120 Inch Series Caged Heavy Duty Needle Roller Bearing, 2 in Dia Bore, 2-9/16 in OD, 1-1/4 in W, 15000 lbf Dynamic/27500 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
1-1/4" 3-PC KNOCKOUT SEAL-ELEKOS125>
LOCTITE LUER LOK ADAPTOR KIT 25 PR/PK -LOC97233 >
1" UNILET COVER FIBER GASKETS-ELEL93G>
