Browning 24-TOOTH 16-PITCH SPUR GEARS BRW NS-S-16-24
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289102372
-
Manufacturer Part Number1211077
-
CountryUSA
-
Face Width1/2 in
-
Pitch Diameter1-1/2 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore
-
Hub Diameter1-5/16 in
-
Hub Projection7/16 in
-
Diametral Pitch16
-
Number of Teeth24
-
Outside Diameter1.62 in
-
Bore Diameter1/2 in
-
Overall Length15/16 in
- Browning® split taper bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Helical gears are quieter than spur gears and give maximum smoothness on parallel shafts
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
-
Alternative Part NumberNSS1624
-
UNSPSC31171707
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
3/8" STRAIGHT SQUEEZE ELECTRICAL CONNECTOR-ELEL42 >
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Koyo HM804843 Caged Bearing Cone, 44.45 mm Dia Bore, 29.37 mm W Cone, 3.6 mm Max Shaft Fillet Radius, 130 kN Dynamic/140 kN Static Load, For Use With TS Type 1-Row Tapered Roller Bearing
Koyo HM804843 Caged Bearing Cone, 44.45 mm Dia Bore, 29.37 mm W Cone, 3.6 mm Max Shaft Fillet Radius, 130 kN Dynamic/140 kN Static Load, For Use With TS Type 1-Row Tapered Roller Bearing
Koyo B-108 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 5/8 in Dia Bore, 13/16 in OD, 1 Row, 1/2 in W, 2450 lb Dynamic/4430 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
