Browning® 1211457 Minimum Plain Bore Type 2 Spur Gear, 12 Diametral Pitch, 14.5 deg Pressure Angle, 3/4 in W Face, 20 Teeth, 1.667 in Dia Pitch, 5/8 to 3/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289102723
-
Manufacturer Part Number1211457
-
CountryUSA
-
Face Width3/4 in
-
Pitch Diameter1.667 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
Gear Ratio1:1
-
TypeMinimum Plain Bore Type 2
-
Hub Diameter1.406 in
-
Hub Projection1/2 in
-
Diametral Pitch12
-
Number of Teeth20
-
Outside Diameter1.83 in
-
Bore Diameter5/8 to 3/4 in
-
Overall Length1-1/4 in
- Browning® Split-Taper® bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
- Without hardened teeth
-
Alternative Part NumberNSS1220
-
UNSPSC31171707
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Warranty Information
-
Catalog
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL2212 >
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
24 FAN HEADS (HEAD ONLY--BRACKET NOT INCLUDED)-FAN26HEAD>
ISOSTATIC™ Oilube® 401249 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1 in OD, 1 in W
Coilhose® N14-12B Coiled Air Hose, 1/4 in Nominal, 1/4 in MPT Swivel End Style, 12 ft L, 185 psi at 70 deg F Working, Nylon, Domestic
Coilhose® N14-12B Coiled Air Hose, 1/4 in Nominal, 1/4 in MPT Swivel End Style, 12 ft L, 185 psi at 70 deg F Working, Nylon, Domestic
