Browning® 1211408 Minimum Plain Bore Type 2 Spur Gear, 12 Diametral Pitch, 14.5 deg Pressure Angle, 3/4 in W Face, 14 Teeth, 1.167 in Dia Pitch, 1/2 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289182664
-
Manufacturer Part Number1211408
-
CountryUSA
-
Face Width3/4 in
-
Pitch Diameter1.167 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
Gear Ratio1:1
-
TypeMinimum Plain Bore Type 2
-
Hub Diameter0.906 in
-
Hub Projection1/2 in
-
Diametral Pitch12
-
Number of Teeth14
-
Outside Diameter1.33 in
-
Bore Diameter1/2 in
-
Overall Length1-1/4 in
- Browning® Split-Taper® bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
- Without hardened teeth
-
Alternative Part NumberNSS1214
-
UNSPSC31171707
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
-
Warranty Information
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Stanley Proto J1212-T500 Combination Wrench 3/8 ASD Fully Polished 12 Point
Stanley Proto J1212-T500 Combination Wrench 3/8 ASD Fully Polished 12 Point-PROJ1212T500
3/4" -ID SPHERICAL OD INSERT BEARING-CHIRA012RRB >
HCI Preferred Supplier 86046 Straight Through High Pressure Plug, 3/8 in MNPT Inlet x 3/8 in Female Outlet, 4000 psi Pressure, 300 deg F, Steel
HCI Preferred Supplier 28620 ST Series Pipe Plug, 3/8 in Nominal, FNPT, Buna-N® Seal/Steel Body
Sharkbite® U855W100 Tubing, 3/8 in Nominal, 0.35 in ID x 1/2 in OD x 100 ft Coil L x 0.07 in THK Wall, White, PEX, Domestic
SharkBite large-diameter Push-to-Connect fittings are the fastest way to connect PEX, copper, CPVC, PE-RT, or HDPE pipe in any combination. They are available in 1-1/4-IN, 1-1/2-IN and 2-IN CTS sizes. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
DOUBLE SHIELDED BALL BEARING-GUL6409ZZ >
