Browning® 1212083 Minimum Plain Bore Spur Gear, 10 Diametral Pitch, 14.5 deg, 1 in W Face, 60 Teeth, 6 in Dia Pitch, 7/8 in Dia Bore, Cast Iron
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289153398
-
Manufacturer Part Number1212083
-
CountryUSA
-
Face Width1 in
-
Pitch Diameter6 in
-
MaterialCast Iron
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore
-
Hub Diameter2-5/8 in
-
Hub Projection7/8 in
-
Diametral Pitch10
-
Number of Teeth60
-
Outside Diameter6.2 in
-
Bore Diameter7/8 in
-
Overall Length1-7/8 in
- Browning® split taper bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Helical gears are quieter than spur gears and give maximum smoothness on parallel shafts
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
-
Alternative Part NumberNCS1060
-
UNSPSC31171707
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Package DescriptionEACH
-
Catalog
Recently Viewed
Browning® 1212083 Minimum Plain Bore Spur Gear, 10 Diametral Pitch, 14.5 deg, 1 in W Face, 60 Teeth, 6 in Dia Pitch, 7/8 in Dia Bore, Cast Iron
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
ILSCO® SafetySub® USPA-350SS-DB Type USPA-SS Dual Rated In-Line Waterproof Splice, 10 AWG to 350 kcmil Aluminum/Copper Conductor, Aluminum
ILSCO® SafetySub® USPA-350SS-DB Type USPA-SS Dual Rated In-Line Waterproof Splice, 10 AWG to 350 kcmil Aluminum/Copper Conductor, Aluminum
Coilhose® N38-12B Coiled Air Hose, 3/8 in Nominal, 3/8 in MPT Swivel End Style, 12 ft L, 165 psi at 70 deg F Working, Nylon, Domestic
Coilhose® N38-12B Coiled Air Hose, 3/8 in Nominal, 3/8 in MPT Swivel End Style, 12 ft L, 165 psi at 70 deg F Working, Nylon, Domestic
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
