Browning 40-TOOTH 10-PITCH SPUR GEARS BRW NS-S-10-40
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289233373
-
Manufacturer Part Number1212018
-
CountryUSA
-
Face Width1 in
-
Pitch Diameter4 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore
-
Hub Diameter2-5/8 in
-
Hub Projection7/8 in
-
Diametral Pitch10
-
Number of Teeth40
-
Outside Diameter4.2 in
-
Bore Diameter7/8 in
-
Overall Length1-7/8 in
- Browning® split taper bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Helical gears are quieter than spur gears and give maximum smoothness on parallel shafts
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
-
Alternative Part NumberNSS1040
-
UNSPSC31171707
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
TAPERED ROLLER BEARING CONE-NTN14125A >
T-55-LX1-1/2 Torque Limiters, Model T55l, 1-1/2"
TORQUE LIMITERS, MODEL T55L, 1-1/2" BORE-BRWT55LX11/2 >
UNION 62162--16" SERRATED STEEL WEED AND BRUSH CUTTER2162 UNION TOOLS COMPANY
THE RAZOR-BACK WEED AND BRUSH CUTTER IS THE FASTEST WAY TO CLEAR AWAY UNWANTED BRUSH. SWING THE BLADE BACK AND FORTH USING A SLICING MOTION. THE DOUBLE-EDGED BLADE WILL CUT THE BRUSH AND DEBRIS ON THE FORWARD AND RETRUN SWINGS.
-UNI62162 >
POWERATED FHP V-BELT >(3-L-660)-GAT6766 >
25-MM-ID FLAT-OD INSERT BEARING - INARAE25NPP>
