Browning® 1215714 Finished Bore Type 1 Spur Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 16 Teeth, 1.6 in Dia Pitch, 3/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289217427
-
Manufacturer Part Number1215714
-
CountryUSA
-
Face Width1 in
-
Pitch Diameter1.6 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
Gear Ratio1:1
-
TypeFinished Bore Type 1
-
Hub Diameter1.313 in
-
Hub Projection5/8 in
-
Diametral Pitch10
-
Number of Teeth16
-
Keyway Size3/16 x 3/32 in
-
Outside Diameter1.8 in
-
Bore Diameter3/4 in
-
Overall Length1-5/8 in
- Browning® Split-Taper® bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Designed to increase output, reduce costs and avoid specials
- Without hardened teeth
- Browning Gears are rated in accordance with AGMA standards
- When you think Special Gears - Think Browning
-
Alternative Part NumberNSS10F16X3/4
-
UNSPSC31171707
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Warranty Information
-
Catalog
Recently Viewed
Browning® 1215714 Finished Bore Type 1 Spur Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 16 Teeth, 1.6 in Dia Pitch, 3/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
GENERAL® 120 Tubing Cutter, 1/8 to 1-1/8 in
EASY TO PULL BACK HANDLE GRIP TO WRING. ANGLED SPONGE HEAD IS SUPER ABSORBENT. ELECTROSTATIC POWERED COATED STEEL HANDLE
-JWH630892>
ECONOMY GLOSS BLACK SPRAY PAINT-RUS9000 >
Dodge® 023004 111 Type E-Xtra Pillow Block Roller Bearing Unit, 1-1/2 in Dia Bore, 6.13 to 6.38 in L Bolt Center-to-Center, 2.13 in Base to Bore Centerline, 7.88 in OAL x 4-1/4 in OAH
Dodge® 023004 111 Type E-Xtra Pillow Block Roller Bearing Unit, 1-1/2 in Dia Bore, 6.13 to 6.38 in L Bolt Center-to-Center, 2.13 in Base to Bore Centerline, 7.88 in OAL x 4-1/4 in OAH
Square D™ 8910DP31V02 8910 1 Pole Definite Purpose Contactor, 110/120 V AC V Coil, 30 A, 1NO Contact, 1 Poles
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This one pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 2.00 inches by 3.29 inches and 2.39 tall. These contactors are UL Listed and CSA Certified.
