Browning® 1234707 Gear Rack, 12 Diametral Pitch, 14.5 deg, 3/4 in W Face, 4 ft OAL, 0.667 in, Steel
Browning® 1234707 Gear Rack, 12 Diametral Pitch, 14.5 deg, 3/4 in W Face, 4 ft OAL, 0.667 in, Steel
-
BrandBrowning®
-
UPC662289277773
-
Manufacturer Part Number1234707
-
CountryUSA
-
Face Width3/4 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
Diametral Pitch12
-
Overall Length4 ft
- Mating Spur Gears must have same pressure angle and pitch
- Standard Lengths are Extra Long to allow for cutting and matching ends
- Manufactured From Mild Steel, 2)
- 4 and 6 FT Available from Stock, 12 FT May Be Available on Some Sizes
- Modification Options Available - 1)
- Cut to Desired Length, 2)
- Milled and Matched Ends, 3)
- Drilled or Drilled and Tapped Holes for Mounting
-
Alternative Part Number4NSR12X3/4
-
UNSPSC31171709
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Class 11
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® 1234707 Gear Rack, 12 Diametral Pitch, 14.5 deg, 3/4 in W Face, 4 ft OAL, 0.667 in, Steel
Browning® 1234707 Gear Rack, 12 Diametral Pitch, 14.5 deg, 3/4 in W Face, 4 ft OAL, 0.667 in, Steel
Browning® 1234764 Gear Rack, 10 Diametral Pitch, 14.5 deg, 1 in W Face, 4 ft OAL, 0.9 in, Steel
Browning® 1234764 Gear Rack, 10 Diametral Pitch, 14.5 deg, 1 in W Face, 4 ft OAL, 0.9 in, Steel
Browning® 1188259 Type 1 Shear Pin Hub, 1/2 to 1-3/4 in Dia Bore, 7/8 in Dia Hub, 7-5/8 in OD Flange, 2-1/8 in L Through Bore
Browning® shear pin hubs are designed to prevent damage to machinery due to sudden overload or jamming by shearing the necked pin at a predetermined load. The inner part of the hub is keyed to the shaft and remains stationary while the outer part, to which the sprocket is bolted, rotates freely after pin breakage, allowing the drive to idle. Shear pin hubs are ideal for heavily lubricated areas where a cost effective solutions is needed.
Browning® 1222488 Minimum Plain Bore Type C1 Change Gear, 16 Diametral Pitch, 14.5 deg Pressure Angle, 1/2 in W Face, 26 Teeth, 1-5/8 in Dia Pitch, 3/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
ALAN 14-THHN ORANGE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE14THHNORG >
3/4-G-T 3/4" -female Pipe Thread Metal Galvanized
3/4" -FEMALE PIPE THREAD METAL GALVANIZED TEE-JPW3/4GT >
