Browning® 1234384 Gear Rack, 20 Diametral Pitch, 20 deg Pressure Angle, 1/2 in W Face, 4 ft OAL, 0.45 in, Steel
Browning® 1234384 Gear Rack, 20 Diametral Pitch, 20 deg Pressure Angle, 1/2 in W Face, 4 ft OAL, 0.45 in, Steel
-
BrandBrowning®
-
UPC662289217397
-
Manufacturer Part Number1234384
-
CountryUSA
-
Face Width1/2 in
-
MaterialSteel
-
Pressure Angle20 deg
-
Diametral Pitch20
-
Overall Length4 ft
- Mating Spur Gears must have same pressure angle and pitch
- Standard Gear Rack - 1. Manufactured From Mild Steel, 2. 14 1/2 Pressure Angle - 32 to 3 DP, 3. 20 Pressure Angle - 20 to 4 DP, 4. 4 and 6 FT Available from Stock, 12 FT May Be Available on Some Sizes
- Modification Options Available - 1. Cut to Desired Length, 2. Milled and Matched Ends, 3. Drilled or Drilled and Tapped Holes for Mounting
- Standard Lengths are Extra Long to allow for cutting and matching ends
-
Alternative Part Number4YSR20X1/2
-
UNSPSC31163000
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Class 11
-
Warranty1 Year
-
Catalog
-
Warranty Information
Recently Viewed
Browning® 1234384 Gear Rack, 20 Diametral Pitch, 20 deg Pressure Angle, 1/2 in W Face, 4 ft OAL, 0.45 in, Steel
Browning® 1234384 Gear Rack, 20 Diametral Pitch, 20 deg Pressure Angle, 1/2 in W Face, 4 ft OAL, 0.45 in, Steel
Crescent® 56626G Key Set, 7 Pieces, 1.5 to 6 mm Hex, Foldable Cushion Grip Handle, Alloy Steel, Black Oxide
Crescent® 56626G Key Set, 7 Pieces, 1.5 to 6 mm Hex, Cushion Grip/Fold-Up Handle, Alloy Steel, Black Oxide
1" ELECTRIC SDS ROTARY HAMMER-MWK536321 >
Browning® 1074541 Type J Q-D® Bushing, 3-15/16 in Dia Bore, 5.1484 in Dia Barrel, 7-1/4 in Dia Flange, 4.51 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Proto® TorquePlus™ J1211MES Combination Wrench, 11 mm Wrench, 12 Points, 15 deg Offset, 3-15/16 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Alemite® 500 Grease Gun, 16 oz Cartridge, 10000 psi psi Operating, Lever Action Drive
