Browning 60-TOOTH 12-PITCH CHANGE GEARS BRW N-CG-12-60
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289270293
-
Manufacturer Part Number1223734
-
CountryUSA
-
Face Width3/4 in
-
Pitch Diameter5 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore Type C1
-
Diametral Pitch12
-
Number of Teeth60
-
Outside Diameter5.16 in
-
Bore Diameter1 in
-
Overall Length3/4 in
- Are stocked with finished bore and two keyways
- For use with stock change gear bushings
- Used for easy ratio changes
- Can weld on a steel hub to create a spur gear
- Can drill and tap for bolt on applications
- Can weld on steel hub for use with Browning® split taper bushing
-
Alternative Part NumberNCG1260
-
UNSPSC31171700
-
Package Description1/PK
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Warranty Information
-
Catalog
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Hougen® Rotabroach® 12226 12000 Annular Cutter, 13/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
186X1" 14 TOOTH BM BANDSAW BLADE-MLF1X186X14T >
Armstrong® 11-851 Crowfoot Wrench, 7/16 in Open End Wrench, 3/8 in Drive, 1.28 in OAL, ASME B107.21, Polished Chrome
Armstrong® 11-851 Crowfoot Wrench, 7/16 in Open End Wrench, 3/8 in Drive, 1.28 in OAL, ASME B107.21, Polished Chrome
BBI 455440 Partially Threaded Cap Screw, 5/8-11, 3 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455440 Partially Threaded Cap Screw, 5/8-11, 3 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
120.5" X 1/2" 18 TOOTH BANDSAW BLADE-MLF1/2X120.5X18T >
