Browning® 3426749 Minimum Plain Bore Type C1 Change Gear, 20 Diametral Pitch, 14.5 deg Pressure Angle, 3/8 in W Face, 85 Teeth, 4-1/4 in Dia Pitch, 5/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289042043
-
Manufacturer Part Number3426749
-
CountryUSA
-
Face Width3/8 in
-
Pitch Diameter4-1/4 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore Type C1
-
Diametral Pitch20
-
Number of Teeth85
-
Outside Diameter4.35 in
-
Bore Diameter5/8 in
-
Overall Length3/8 in
- Browning Split Taper Bushed Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
- Helical Gears are quieter than spur gears and give maximum smoothness on parallel shafts
-
Alternative Part NumberNCG2085
-
UNSPSC31171700
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
-
Warranty Information
Recently Viewed
Browning® 3426749 Minimum Plain Bore Type C1 Change Gear, 20 Diametral Pitch, 14.5 deg Pressure Angle, 3/8 in W Face, 85 Teeth, 4-1/4 in Dia Pitch, 5/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
A-339-1/2 CROSBY CLEVIS SLING HOOKS
CROSBY A3391/2The Crosby A-339 1/2" is a forged alloy steel Clevis Grab Hook designed for use with 1/2-inch Grade 80 rigging chains in overhead lifting and tie-down applications.
5-GAL MEDIUM R&O HYDRAULIC OIL iso-32
Coilhose® MR140MB Regulator Mounting Bracket and Nut, For Use With Coilhose Miniature FRLs, 1/4 in and 3/8 in
Coilhose® MR140MB Regulator Mounting Bracket and Nut, For Use With Coilhose Miniature FRLs, 1/4 in and 3/8 in
ISOSTATIC™ Oilube® 401419 Round Bore Sleeve Bearing, 1-1/4 in Dia Bore, 1-5/8 in OD, 2 in W
Perform a variety of digging and drilling jobs on floors or the ground with this heavy duty INLINE™ design. The 2 in spline drive rotary hammer delivers 19.9 ft-lb of blow energy for drilling large holes in concrete or asphalt, bushing, driving ground rods, scraping floors, digging and tamping. The INLINE™ design offers more comfortable operation and the soft-grip side-handle can be attached in three positions - including the rear switch handle - to minimize bending. A system of anti-vibration absorption and reduction components decreases operator fatigue. Sophisticated electronic feedback offers consistent operation and overload protection. This robust electric hammer features a variable speed dial for optimum control and a service reminder light the tool uses standard spline and round/hex accessories and comes with a carrying case.
