Browning 46-TOOTH 10-PITCH CHANGE GEARS BRW N-CG-10-46
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289271108
-
Manufacturer Part Number1224542
-
CountryUSA
-
Face Width1 in
-
Pitch Diameter4.6 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore Type C1
-
Diametral Pitch10
-
Number of Teeth46
-
Outside Diameter4.8 in
-
Bore Diameter1-1/4 in
-
Overall Length1 in
- Are stocked with finished bore and two keyways
- For use with stock change gear bushings
- Used for easy ratio changes
- Can weld on a steel hub to create a spur gear
- Can drill and tap for bolt on applications
- Can weld on steel hub for use with Browning® split taper bushing
- Browning Change Gears, change gear bushing sold separately
- When you think Special Gears - Think Browning
-
Alternative Part NumberNCG1046
-
UNSPSC31171700
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
-
Warranty Information
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Hougen® Rotabroach® 12256 12000 Annular Cutter, 1-3/4 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
10" X 12" MULE HEAD WIPES--PK/72-WHYBMW6>
Makita® GA4530K Angle Grinder With Lock-On Switch, 4-1/2 in Dia Wheel, 5/8-11 UNC Arbor/Shank, 120 V AC, Thumb with Lock-On Switch
Makita® GA4530K Angle Grinder With Lock-On Switch, 4-1/2 in Dia Wheel, 5/8-11 UNC Arbor/Shank, 120 VAC, Thumb with Lock-On Switch
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Koyo 5310ZZ 5300 Round Angular Contact Ball Bearing, 50 mm Dia Bore, 110 mm Dia Outside, 2 Rows, 44.4 mm W, 24 deg, 102 kN Dynamic/62.2 kN Static Load
Koyo 5310ZZ 5300 Round Angular Contact Ball Bearing, 50 mm Dia Bore, 110 mm Dia Outside, 2 Rows, 44.4 mm W, 24 deg, 102 kN Dynamic/62.2 kN Static Load
