Browning® 1224674 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 59 Teeth, 5.9 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289201280
-
Manufacturer Part Number1224674
-
CountryUSA
-
Face Width1 in
-
Pitch Diameter5.9 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore Type C1
-
Diametral Pitch10
-
Number of Teeth59
-
Outside Diameter6.1 in
-
Bore Diameter1-1/4 in
-
Overall Length1 in
- Are stocked with finished bore and two keyways
- For use with stock change gear bushings
- Used for easy ratio changes
- Can weld on a steel hub to create a spur gear
- Can drill and tap for bolt on applications
- Can weld on steel hub for use with Browning® split taper bushing
- Browning Change Gears, change gear bushing sold separately
- When you think Special Gears - Think Browning
-
Alternative Part NumberNCG1059
-
UNSPSC31171700
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Warranty Information
-
Catalog
Recently Viewed
Browning® 1224674 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 59 Teeth, 5.9 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
7-1/2" 50# ORANGE CABLE TIE-PACK OF 100-CTE750OE100 >
Chapin® 1949 Concrete Open Head Sprayer, 3.5 gal, 0.5 to 1 gpm, 40 to 60 psi, 48 in Hose Length, Tri-poxy® Steel Tank
The Chapin® industrial FKM concrete sprayer has a 3.5 gal Tri-Poxy® lined steel tank that provides triple protection against rust, corrosion and damage from denting. Featuring a large 4 in mouth opening for easy filling and cleaning, brass wand, brass shut-off, brass fan tip nozzle for even coverage, a 48 in reinforced hose with threaded fittings and FKM seals for most concrete sealer applications (check chemical manufacturers instructions before use). Our open head tanks have a unique tri-lock seal that insures the pump cap locks tightly into place.
Thomson® Precision Steel Ball Bushing® OPN122026 Adjustable Open Linear Bearing, 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L
Precision Steel Ball Bushing® bearings offer great improvements in efficiency, productivity and accuracy over high-friction plain bearings flat-ways. The all-steel design makes the bearing product line perfect for replacing plain bearings in high temperature applications. Rigid construction makes them very durable compared to ball bushing bearings with polymer components. When installed in a standard Thomson® pillow block, the Precision Steel Ball Bushing® bearing can self-align up to 3 deg in all directions.
Browning® 1225705 Minimum Plain Bore Type C1 Change Gear, 8 Diametral Pitch, 14.5 deg Pressure Angle, 1-1/4 in W Face, 92 Teeth, 11-1/2 in Dia Pitch, 1-3/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
MCR Safety STSLX2 Luminator™ STSL Short Sleeve T-Shirt, 2XL, Fluorescent Lime, Polyester, 30.7 in L
MCR Safety STSLXL Luminator™ STSL Short Sleeve T-Shirt, XL, Fluorescent Lime, Polyester, 29.9 in L
