Straight Bevel Right Angle Drives
Browning® 1251529 Straight Type LR Bevel Gear Reducer, Shaft Input, Shaft Output, 1 hp, 2:1 Gear, 875 rpm Maximum Output, 36.013 in-lb Input/57.62 in-lb Output Torque Rating
Browning® cast iron bevel and spiral bevel gear reducers are constructed of rugged cast iron housings. These housings are line bored for precise gear and bearing alignment. To offer maximum performance, these reducers are designed with tapered roller and ball bearings. Browning® cast iron bevel and spiral bevel gear reducers are available in six sizes and ratios. These range from 1:1 to 3:1, with speed-up ratios available. Torque capacity ranges from 99 to 5942 in-lb.
Browning® 1251370 Straight Type LR Bevel Gear Reducer, Shaft Input, Shaft Output, 1 hp, 1:1 Gear, 1750 rpm Maximum Output, 36.013 in-lb Input/28.82 in-lb Output Torque Rating
Browning® cast iron bevel and spiral bevel gear reducers are constructed of rugged cast iron housings. These housings are line bored for precise gear and bearing alignment. To offer maximum performance, these reducers are designed with tapered roller and ball bearings. Browning® cast iron bevel and spiral bevel gear reducers are available in six sizes and ratios. These range from 1:1 to 3:1, with speed-up ratios available. Torque capacity ranges from 99 to 5942 in-lb.
Browning 1:1 PARALLEL SHAFT GEAR REDUCERS BRW 12-HB-1-SN-10
Browning® cast iron bevel and spiral bevel gear reducers are constructed of rugged cast iron housings. These housings are line bored for precise gear and bearing alignment. To offer maximum performance, these reducers are designed with tapered roller and ball bearings. Browning® cast iron bevel and spiral bevel gear reducers are available in six sizes and ratios. These range from 1:1 to 3:1, with speed-up ratios available. Torque capacity ranges from 99 to 5942 in-lb.
Recently Viewed
GEARWRENCH® 80076 Screwdriver, 1/4 in Slotted Point, Steel Shank, 28-3/8 in OAL, Black Oxide, ASME B107.600-2008
GEARWRENCH® screwdrivers are ergonomically designed to fit your hand while on the job. The tri-lobe handle shape provides the best performance with the least amount of effort. The dual material of the handle is oil and solvent resistant. The tips have a black oxide, non-slip coating. The part numbers and sizes are laser etched on the blade.
MORSE® 32661 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-14 Thread, H4 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
Crescent® PQR1425N Quikread® P1000 Tape Measure, 25 ft L x 1 in W Blade, Steel Blade, 1/16 in Graduation
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Each blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Browning® 1125301 Double Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 3/4 to 1-1/2 in Dia Bore, 3.19 in OD, 35 Chain, 25 Teeth, 3/8 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
GEARWRENCH® 85574 Open End Combination Wrench, 7/16 in Wrench, 12 Points, 0/15 deg Offset, 6.508 in OAL, Polished Chrome
The GEARWRENCH Open-End Ratcheting Wrenches make short work of tough jobs. These wrenches let you quickly ratchet nuts and bolts on or off without removing the wrench from the fastener. The open end has the dependable strength of a crows foot ratchet, while the ratcheting box-end works with just five degrees of swing arc to let you turn fasteners in low-access areas.
United Abrasives-SAIT 1AX Blue Line™ 57910 Semi-Friable Coated Abrasive Belt, 4 in W x 24 in L, 220 Grit, Very Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
