Morse® Raider® Plus XJ0178 Standard Single Reduction Worm Gear Reducer, C-Face Quill Input, Shaft Output, 2.91 hp Input, 40:1 Gear, 43.7 rpm Maximum Output, 104.8 in-lb Input/43.7 in-lb Output Torque Rating
With a large variety of add on accessories, the Raider® Plus worm gear reducer is a problem solver. Four available styles make it the most flexible worm gear product in the drives and components portfolio. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors. The Raider Plus worm gear reducer product line features a center distance range from 1 to 6 in with ratios from 5:1 to 60:1. It also contains an output torque range from 200 to 10000 ft-lb. Additionally, the line is an industry leader due to its patented design technology and manufacturing techniques.
-
BrandMorse®
-
UPC662288364603
-
Manufacturer Part NumberXJ0178
-
CountryUSA
-
Centre Distance3-3/4 in
-
MaterialCast Iron
-
Torque Rating104.8 in-lb Input/43.7 in-lb Output
-
Gear Ratio40:1
-
TypeStandard Single Reduction
-
Horsepower2.91 hp Input
-
Input Maximum Speed1750 rpm
-
Input Size5/8 in Dia
-
Input TypeC-Face Quill
-
Keyway Size3/16 x 3/32 in Input
-
Output Maximum Speed43.7 rpm
-
Output Size1-5/8 in Dia x 3-1/2 in L
-
Efficiency80 %
-
Output TypeShaft
- Rugged cast iron housing provides maximum strength and dependability
- Integral worm and shaft - hardened to 58RC for extra strength
- Tapered roller bearings on input and output shafts - absorb radial and thrust loads
- Forged or cast bronze worm gears - provide optimum balance of strength and wear resistance
-
Alternative Part Number375Q56LR40
-
UNSPSC26111537
-
Package Description1/PK
-
WarrantyLimited
-
Instruction/Installation Manual
Recently Viewed
Morse® Raider® Plus XJ0178 Standard Single Reduction Worm Gear Reducer, C-Face Quill Input, Shaft Output, 2.91 hp Input, 40:1 Gear, 43.7 rpm Maximum Output, 104.8 in-lb Input/43.7 in-lb Output Torque Rating
With a large variety of add on accessories, the Raider® Plus worm gear reducer is a problem solver. Four available styles make it the most flexible worm gear product in the drives and components portfolio. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors. The Raider Plus worm gear reducer product line features a center distance range from 1 to 6 in with ratios from 5:1 to 60:1. It also contains an output torque range from 200 to 10000 ft-lb. Additionally, the line is an industry leader due to its patented design technology and manufacturing techniques.
HCI Preferred Supplier 46153 Shut-Off Cock, 3/8 in Nominal, FIP End Style, Forged Brass Body
HCI Preferred Supplier 46153 Shut-Off Cock, 3/8 in Nominal, FIP End Style, Forged Brass Body
Gates® Power Transmission Micro-V® 500J4 Heavy Duty V-Belt, J Section, 3/32 in W Top, 50 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
