Browning 5:1 RAIDER WORM GEAR REDUCERS BRW 175-Q-140-LR-5
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
-
BrandMorse®
-
UPC662288343615
-
Manufacturer Part NumberXD1141
-
CountryUSA
-
Lubrication TypePolyglycol Oil
-
Centre Distance1-3/4 in
-
MaterialCast Iron
-
Torque Rating87.51 in-lb Input/350 in-lb Output
-
Gear Ratio5:1
-
TypeSingle Reduction Standard
-
Mounting TypeDirect/Floor
-
Horsepower1 hp
-
Input Maximum Speed1750 rpm
-
Input Size7/8 in Dia
-
Input TypeC-Face Quilled
-
Dimensions7.33 in L x 6.78 in W x 5.75 in H
-
Keyway Size3/16 x 3/32 in Input
-
Output Maximum Speed350 rpm
-
Output Size7/8 in Dia x 2.05 in L
-
Efficiency80 %
-
Output TypeDouble Solid Shaft
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 143/145TC motor frame size
-
Alternative Part Number175Q140LR5
-
UNSPSC25173800
-
Package DescriptionEACH
-
Standards/ApprovalsFDA Approved
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning 5:1 RAIDER WORM GEAR REDUCERS BRW 175-Q-140-LR-5
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
Gates® Power Transmission PowerGrip® HTD® P18-5M-15AL Sprocket, 1/4 to 3/8 in Rough Stock Bore, 1.083 in OD, 18 Grooves, 1.128 in Dia Pitch, 0.547 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
1/2 X 6-GN 1/2"-mpt X 6" Galvanized Nipple
1/2"-MPT X 6" GALVANIZED NIPPLES-JPW1/2X6GN>
TCM110X130X13TC>
3/4" -MALE PIPE THREADX12" GALVANIZED NIPPLE-FIT3/4X12GN >
