TA6307H40 Dodge® Torque-Arm™ II 905000 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 15 hp, 40:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
-
BrandDodge®
-
UPC782475613137
-
Manufacturer Part Number905000
-
CountryUSA
-
Lubrication TypeOil
-
FinishGray
-
MaterialCast Iron
-
Gear Ratio40:1
-
TypeHeavy Duty Single and Double Reduction
-
Mounting TypeShaft
-
Horsepower15 hp
-
Input Maximum Speed1945 rpm
-
Input Size1-5/8 in Dia x 6 in L
-
Input TypeSolid Shaft
-
Dimensions19.35 in L x 10.33 in W x 23.81 in H
-
Output Size3-3/16 in
-
Output TypeTapered Hollow Bore
- Unparalleled torque ratings
- Industry leading backstop design
- Patented sealing system
- Modular steel motor mount system
- Patented twin tapered bushing system
- Advanced sealing system
- 1945 rpm input/50 rpm output
- Case size: 5
- Size: TA5215H
-
Alternative Part NumberTA5215H40
-
UNSPSC26111536
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|ATEX|BSA|CEMA|EASA|MHI|MPTA|NEMA|NSSSGA|PTDA|RoHS Compliant|SME|SWE|TUV Certified
-
WarrantyLimited
-
Warranty Information
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
TA6307H40 Dodge® Torque-Arm™ II 905000 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 15 hp, 40:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
GARVIN® LL75 LL-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in LL-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LL-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LC50 C-Style Conduit Body With Unit Cover and Neoprene Gasket, 1/2 in Hub, Die Cast Aluminum, Powder Coated
1/2 in C-style conduit bodies are attached to 1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries C-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
TA3203H25M Dodge® Torque-Arm™ II 906002 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 50 hp, 15:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
TXT926AT Dodge® Torque-Arm™ II 904002 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 20 hp, 15:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
Steel City® BU506-1 Non-Metallic Bushing, 2 in Conduit, 2 in Trade, Plastic
