TA0107L25 Dodge® Torque-Arm™ II 906000 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 25 hp, 40:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
-
BrandDodge®
-
UPC782475628872
-
Manufacturer Part Number906000
-
CountryUSA
-
Lubrication TypeOil
-
FinishGray
-
MaterialCast Iron
-
Gear Ratio40:1
-
TypeHeavy Duty Single and Double Reduction
-
Mounting TypeShaft
-
Horsepower25 hp
-
Input Maximum Speed1916 rpm
-
Input Size2.1875 in Dia x 6.35 in L
-
Input TypeSolid Shaft
-
Dimensions20.55 in L x 10.84 in W x 25.23 in H
-
Output Size3-7/16 in
-
Output TypeTapered Hollow Bore
- Unparalleled torque ratings
- Industry leading backstop design
- Patented sealing system
- Modular steel motor mount system
- Patented twin tapered bushing system
- Advanced sealing system
- 1916 rpm input/50 rpm output
- Case size: 6
- Size: TA6307H
-
Alternative Part NumberTA6307H40
-
UNSPSC26111536
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|ATEX|BSA|CEMA|EASA|MHI|MPTA|NEMA|NSSSGA|PTDA|RoHS Compliant|SME|SWE|TUV Certified
-
WarrantyLimited
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
-
Warranty Information
Recently Viewed
TA0107L25 Dodge® Torque-Arm™ II 906000 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 25 hp, 40:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
14" X 25" X 2" PLEATED AIR FILTERS
Kuri Tec® K050-1216X100 K050 Phthalate Free Tubing, 100 ft L, 35 psi Working, PVC, Domestic
Kuri Tec® K050-1216X100 K050 Phthalate Free Tubing, 100 ft L, 35 psi Working, PVC, Import
Knipex® Cobra® 87 01 150 SBA High-Tech Water Pump Plier, 1-1/4 in Round Pipe, 1-12/64 in Hex Nut, 7/8 in L x 7/8 in W V-Jaw, Knurled Jaw Surface, 6 in OAL, Specifications Met: DIN ISO 8976
Knipex® Cobra® the High-tech water pump Pliers. no more time-consuming presetting of the required opening size. Just position the upper jaw to the workpiece, push button and move close the lower jaw, ingeniously simple.
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
Bobrick 2892 ClassicSeries® Twin Jumbo-Roll Toilet Tissue Dispenser, Wall Mount, 304 Stainless Steel
Satin-finish stainless steel. Equipped with tumbler lock. Spindles hold two 10 in dia rolls with 2-1/4 in Dia core rolls; convertible for 3 in Dia core rolls. Sliding access panel exposes one roll at a time, allows easy roll change-over. Wide viewing slot in door. Quick reloading. Unit 20-13/16 in W x 5-5/16 in D x 11-3/8 in H.
