J-Mount Base Kits
Morse® XK9003 Vertical J-Base Kit, For Use With Raider® Plus Size 4-1/2 in Center Distance Worm Gear Reducer, Cast Iron
Recently Viewed
MORSE® 25730 1766 Straight Shank Cap Screw Counterbore, 3/8 in Screw, 0.601 in Dia Bore, 6-1/2 in OAL
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 150mm (6") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
48X96X1/4" LEXAN/POLYCARBONATE BRAND SHEET-CPI4X8X1/4LEXAN/POLYCARBONATE >
Browning® 1296573 T65L Automatic Torque Limiter, 1-7/16 in Finished Bore, 6-1/2 in OD, 4800 in-lb (1-Spring)/8800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
SPRING JD CORN HEAD-KABP61703>
A 2" x 6" Schedule 80 PVC Pipe Nipple used in high-pressure plumbing and irrigation systems.
