Dichtomatik N70226 O-Ring, 226 Dash Number, 1.984 in ID x 2.262 in OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom 226
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70226
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter1.984 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter2.262 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
MORSE® Edge Hog® 59615 5970 Premium Carbide Burr, Pointed End, Cone Head, 3/8 in Dia Head, 5/8 in L of Cut, 2-3/8 in OAL, Double Cut
Reelcraft 45-FOOT #12/3 EXTENSION CORD REELS REC L-4545-123-3
The heavy duty series 4000 cord reels are all steel construction and compact for a wide range of applications with critical space requirements. A robust collector ring assures maximum conductivity current flow. Guide arm adjusts to two positions.
Browning® 3748472 Taper Lock Bushing, 9/16 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Outside Diameter (OD): 5/32" Inside Diameter (ID): 0.106"Working Pressure: 175 psi at room temperature Material: High-quality extruded polyethylene resin Fitting Compatibility: Works seamlessly with Coilock push-to-connect and standard poly-tube compression fittings.
18" RIGHT HAND SANDBLASTING GLOVE-SUR12711 >
