Dichtomatik 75115170 O-Ring, 134 Dash Number, 1.862 in ID x 2.068 in OD, PTFE, 55 Durometer, Import, Custom 134-TEFLON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
-
BrandDichtomatik
-
Manufacturer Part Number75115170
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialPTFE
-
ColorWhite
-
Inside Diameter1.862 in
-
Domestic/ImportImport
-
Durometer55
-
Outside Diameter2.068 in
- Good chemical resistance to aggressive acids, bases, alcohols and oils
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|ISD Certified|NFPA Listed|PTDA Certified
-
Alternative Part NumberTEF134
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Dichtomatik 75115170 O-Ring, 134 Dash Number, 1.862 in ID x 2.068 in OD, PTFE, 55 Durometer, Import, Custom 134-TEFLON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
EZ-FLO® 36215 Faucet Slip-Joint washer, 1-1/2 in Nominal
The Eastman Slip-Joint Washer is constructed of a high-impact polyethylene plastic for a long-lasting durability. The white washer measures 1-1/2-IN. Designed for use in tubular drain applications, the washer works in conjunction with a slip-joint nut (not included) to seal the connection between PVC pipes to prevent leakage. Sold and priced 100 per order.
Dichtomatik N70360 O-Ring, 360 Dash Number, 5.85 in ID x 6.27 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
BLACK/GRAY SAFETY GLASSES/GOGGLES-GSI21GB78>
24 TOOTHXH-PITCH 4" WIDE MINIMUM PLAIN BORE GEARBELT SPROCKET-BRW24XHB400 >
MORSE® 58124 5940 Ball Nose Center Cutting Regular Length Single End End Mill, 3/8 in Dia Cutter, 7/8 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, Bright
