Dixon® KRW20 Coupling Gasket, 1-1/2 in Nominal, 1-5/16 in ID x 1-15/16 in OD x 1/8 in THK, Rubber, Domestic
Dixon® KRW20 Coupling Gasket, 1-1/2 in Nominal, 1-5/16 in ID x 1-15/16 in OD x 1/8 in THK, Rubber, Domestic
-
BrandDixon®
-
UPC089109720286
-
Manufacturer Part NumberKRW20
-
CountryUSA
-
Thickness1/8 in
-
MaterialRubber
-
Nominal Size1-1/2 in
-
Inside Diameter1-5/16 in
-
Domestic/ImportDomestic
-
Outside Diameter1-15/16 in
- For use with suction, long and short shank couplings
- For use with NPSM couplings
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
-
UNSPSC31401501
-
Package Description100/BX
-
WarrantyLimited
-
Catalog
Recently Viewed
Dixon® KRW20 Coupling Gasket, 1-1/2 in Nominal, 1-5/16 in ID x 1-15/16 in OD x 1/8 in THK, Rubber, Domestic
Dixon® KRW20 Coupling Gasket, 1-1/2 in Nominal, 1-5/16 in ID x 1-15/16 in OD x 1/8 in THK, Rubber, Domestic
#8 X 5/8" Hex Head Slotted Sheet Metal Screws With Washer
Browning® 1212273 Minimum Plain Bore Spur Gear, 8 Diametral Pitch, 14.5 deg, 1-1/4 in W Face, 12 Teeth, 1-1/2 in Dia Pitch, 3/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Brass shim is made from a half hard, cold rolled, 260 alloy brass. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where corrosion problems exist, low magnetic permeability. Excellent forming qualities and may be lightly drawn, blanked or stamped. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance, mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Weiler® 10012 End Brush, 1 in Dia Brush, Crimped, 0.02 in Dia Filament/Wire, Steel Fill, 1-1/8 in L Trim
Weiler® 10012 End Brush, 1 in Dia Brush, Crimped, 0.02 in Dia Filament/Wire, Steel Fill, 1-1/8 in L Trim
Caged roller followers provide large internal grease storage capacity for applications where relubrication is infrequent. Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds. Caged roller followers are avail able with and with out seals. The unsealed design provides the additional advantages of very low friction to prevent skidding in lightly loaded applications and provides for flow-through lubrication. Caged roller followers normally mount directly on a hardened and ground pin. RBC® offers a line of Precision Ground Inner Rings to simplify application of caged roller followers.
