Weiler® 10012 End Brush, 1 in Dia Brush, Crimped, 0.02 in Dia Filament/Wire, Steel Fill, 1-1/8 in L Trim
Weiler® 10012 End Brush, 1 in Dia Brush, Crimped, 0.02 in Dia Filament/Wire, Steel Fill, 1-1/8 in L Trim
-
BrandWeiler®
-
Manufacturer Part Number10012
-
CountryUSA|Canada
-
Filament/Wire Diameter0.02 in
-
Filament/Wire TypeCrimped
-
Fill MaterialSteel
-
Maximum Speed22000 rpm
-
Trim Length1-1/8 in
-
Shank Diameter1/4 in
-
Overall Length6.688 in
-
Brush Diameter1 in
- A solid end construction
- Very flexible brushing action
- Ideal for More Demanding Light-Duty Cleaning Applications in Corners and Hard-To-Reach Areas
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MK5110012 |
| Fastenal | 0202180 |
| MSC | 00462739 |
-
UNSPSC31191521
-
Package Description10/PK
-
Standards/ApprovalsANSI B165.1|CSA Approved
Recently Viewed
Weiler® 10012 End Brush, 1 in Dia Brush, Crimped, 0.02 in Dia Filament/Wire, Steel Fill, 1-1/8 in L Trim
Weiler® 10012 End Brush, 1 in Dia Brush, Crimped, 0.02 in Dia Filament/Wire, Steel Fill, 1-1/8 in L Trim
Magnolia Brush 4624 Heavy Duty Non-Sparking Floor and Driveway Squeegee With 4100 1/4 THK Steel Bracket Handle, 24 in W, Rubber Blade, Curved Blade Shape, 60 in L Handle
ACRYLIC GLO-ORANGE FENCEPOST LEVEL-JWH365893>
Hougen® Rotacut™ 11088 Arbor With 11083 Pilot Pin, 3/8 in Triple Flatted Shank, Steel
Hougen® Rotacut™ 11088 Arbor With 11083 Pilot Pin, 3/8 in Triple Flatted Shank, Steel
Koyo TRA-1828 Double Direction Thrust Washer, 28.58 mm ID x 44.45 mm OD, 0.81 mm W
Ideally, a thrust washer should be stationary with respect to and piloted by its supporting or backing member whether or not this is an integral part of the shaft or housing. There should be no rubbing action between the thrust washer and any other machine member. The economics of design, however, often preclude these ideal conditions and thrust washers must be employed in another manner. In such cases, design details should be determined in consultation with your representative.
