Edison MEQ1.6 Time Delay Midget Fuse, 1.6 A, 500 V AC, 10 kA Interrupt
Edison MEQ1.6 Time Delay Midget Fuse, 1.6 A, 500 VAC, 10 kA Interrupt
-
BrandEdison
-
UPC782634786115
-
Manufacturer Part NumberMEQ1.6
-
CountryUSA
-
MaterialFiber
-
Voltage Rating500 V AC
-
Amperage Rating1.6 A
-
SeriesMEQ
-
Interrupt Rating10 kA
-
Body Size13/32 in Dia x 1-1/2 in L
- Compact dimensions
- Time delay allows harmless inductive surges to pass without needless fuse opening
-
Alternative Part Number8429654
-
UNSPSC39121609
-
IDEA Index ID8429654
-
Package DescriptionEACH
-
Standards/ApprovalsBAA Compliant|CSA Certified LR700489|UL File E162443
-
Specification Sheet
Recently Viewed
Edison MEQ1.6 Time Delay Midget Fuse, 1.6 A, 500 VAC, 10 kA Interrupt
25-LBS #7018-3/32" WELDING RODS -FOR30725 >
HCI Preferred Supplier 943311 2-Piece Gas Ball Valve, 3/8 in Nominal, FIPS End Style, Forged Brass Body, Regular Port, PTFE/NBR Softgoods
This 3/8 inch two-piece brass gas ball valve with female threaded end connections is used in residential and commercial applications for natural gas and LP gas on in-house and indoor piping systems. The valve features brass body construction, virgin PTFE seats and seals, brass end piece and plug, and zinc alloy handle. The temperature range is -20 to 125 degrees F (-29 to 52 degrees C). The maximum working pressure is 5 psi (34 kPa).
MORSE® 59066 5989 Regular Length Single End Drill Mill, 5/16 in Dia, 90 deg Point, 2 Flutes, 13/16 in L Flute, 13/16 in L of Cut, 5/16 in Dia Shank, 2-1/2 in OAL, Bright
NIBCO 1854-030 Loose Ring Flange, 3 in, CPVC, Socket, 150 lb, Domestic
Loose Ring Flange, 3 in, CPVC, Socket, 150 lb, Domestic
E7018 AC mild steel "Low Hydrogen" welding rod easily produces quality results on smaller amperage AC/DC welders. It is suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis.
