Remke Tuff-Seal™ RSR-213 Straight Cord Grip Connector, 3/4 in Trade, 0.688 to 0.812 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
-
BrandRemke
-
UPC785411112138
-
Manufacturer Part NumberRSR-213
-
CountryUSA|Canada
-
Cable Openings0.688 to 0.812 in
-
Temperature Rating-40 to 149 deg C
-
MaterialAluminum
-
Trade Size3/4 in
-
Connection TypeMNPT x Compression
-
SeriesRSR
- Combination hex and knurled tightining surface for faster installation
- Optional stainless steel wire mesh for added strain relief
- Optional embedded BUNA-N O-ring option for watertight, corrosion-resistant seal
- Anti-friction washer for easier compression and secure fit
- Metallic composition
- NEMA 3, NEMA 3R, NEMA 4, NEMA 6 and NEMA 12 enclosure
- IP52, IP54, IP65, IP67 IEC rating
- Form size 3
- Suitable for use in corrosive environments
- Tuff-Seal™ RSR cord grips protect cable from damage and pull-out and are used in conduit hubs or knockouts at the point where the electrical cable is to be terminated, suitable for use in corrosive environments
-
Alternative Part Number20869991
-
UNSPSC39121431
-
IDEA Index ID20869991
-
Package DescriptionEACH
-
Standards/ApprovalsRoHS Compliant|WEE Compliant|UL File No. E53599|CSA File No. 28985|NEC Article 400-10|UL94 V-2 Flammability Rating
-
Warranty1 Year
-
Catalog
-
Full Engineering Drawing
Recently Viewed
Remke Tuff-Seal™ RSR-213 Straight Cord Grip Connector, 3/4 in Trade, 0.688 to 0.812 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
Dodge® 083469 First Stage Pinion Gear, 9 Diametral Pitch, 22 Teeth, 1-1/2 in Dia Pitch
Dodge® 083469 First Stage Pinion Gear, 9 Diametral Pitch, 22 Teeth, 1-1/2 in Dia Pitch
MCR Safety DC240 Deuce® Plus Single Lens Safety Glasses, Duramass® Anti-Fog, Clear Lens, Frameless Frame, Frosted, Nylon Frame, Polycarbonate Lens, ANSI Z87+, CAN/CSA Z94.3
Browning® 767686 VPS 200 Normal Duty Pillow Block Ball Bearing, 1-5/8 in Dia Bore, 5-13/64 to 6-7/64 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-3/8 in OAL x 4-1/4 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
48" STEEL HANDLE POST HOLE DIGGER-JWH704483>
1-GAL SHELL 15-W-40 ROTELLA OIL-SHL56026 >
