BBI 349016 Regular Split Lock Washer, 1-1/8 in Nominal, Alloy Steel, Zinc CR+3
BBI 349016 Regular Split Lock Washer, 1-1/8 in Nominal, Alloy Steel, Zinc CR+3
-
BrandBBI
-
Manufacturer Part Number349016
-
CountryUSA
-
FinishZinc CR+3
-
Thickness0.281 in
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
TypeRegular
-
Nominal Size1-1/8 in
-
Inside Diameter1.153 in
-
Outside Diameter1.847 in
- A coiled, hardened, split circular washer with a slightly trapezoidal wire section
-
UNSPSC31161801
-
Package Description50/CS
-
Standards/ApprovalsASME B18.21.1
Recently Viewed
BBI 349016 Regular Split Lock Washer, 1-1/8 in Nominal, Alloy Steel, Zinc CR+3
GEARWRENCH® 81737 Long Length Open End Combination Wrench, 7 mm Wrench, 12 Points, 15 deg Offset, 138 mm OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
Leviton® OSSMD-GDW 1-Pole Dual Relay Field Configurable Self Adjusting Occupancy Sensor, 120/230/277 V AC, Multi-Technology/PIR/Ultrasonic Sensor, 2400 sq-ft Coverage, 180 deg Viewing, Wall Mounting
The OSSMD provides automatic lighting control for two separate loads from a single unit. It is compatible with incandescent, fluorescent, low voltage lighting and fan loads. The unit features dual manual-override switches that can be used to toggle the ON/OFF status of each lighting load while an area is occupied. The OSSMD can be installed in place of two single pole wall switches and fits in a standard single gang wall box.
National Hardware® N120-626 Ceiling Hook, #10, 2-1/16 in, 25 lb Capacity, Steel, Zinc Plated
National Hardware® N120-626 Ceiling Hook, #10, 2-1/16 in, 25 lb Capacity, Steel, Zinc Plated
ELECTRIC LUG CRIMPING TOOL - #6 AWG to #3/0 AWG. Hammer type cable lug crimping tool, spring loaded. Crimps cable lugs from #6 American Wire Gauge (AWG) to #3/0 AWG.
The Klein-Kurve Dual NM Cable Stripper/Cutter allows you to cleanly remove the outer jacket of 12/2 and 14/2 Type NM-B non-metallic sheathed cable. Stripping holes easily remove the insulation on 12 and 14 AWG solid wire. Precision shear-type blades provide square clean cuts on solid copper wire. Curved handles with double-dipped grips makes this stripper/cutter comfortable to use every day.
12/2 and 14/2 stripping slots quickly remove outer jacket of Type NM-B non-metallic sheathed cable
Stripping holes easily remove insulation on 12 and 14 AWG lead wire
New lock design prevents accidental locking and loosening over time
Precision shear-type blades for square, clean cuts on solid copper wire
Narrow, strong-gripping, serrated nose for easy bending, shaping and pulling of wire in tight places
Holes for screw-shearing, wire looping and bending
Coil spring provides fast self-opening action
