Proto® TorquePlus™ J1241M Anti-Slip Design Combination Wrench, Metric, 41 mm Wrench, 12 Points, 15 deg Offset, 23 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
Proto® TorquePlus™ J1241M Anti-Slip Design Combination Wrench, Metric, 41 mm Wrench, 12 Points, 15 deg Offset, 23 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
-
BrandProto®
-
UPC662679071219
-
Manufacturer Part NumberJ1241M
-
CountryUSA|Canada
-
Finish/CoatingSatin
-
MaterialAlloy Steel
-
Throat Depth51.1 mm
-
Measurement SystemMetric
-
TypeAnti-Slip Design
-
Handle TypeSlip Resistant Grip
-
Head Angle15 deg
-
Wrench Opening41 mm
-
Wrench TypeSpline
-
Number of Points12
-
Specifications MetASME B107.100, ANSI B107.9
-
Offset Angle15 deg
-
Open End Thickness16.3 mm
-
Open End Width86.1 mm
-
Overall Length23 in
-
Box End Thickness23.4 mm
-
Box End Width61.6 mm
- Satin finish provides corrosion resistance and a slip-resistant grip
- 12 point box end allows for fine indexing, helping to improve speed and access
- Fits 4, 6 and 12 point fasteners
- Anti-slip design (ASD) open end
- Box ends incorporate the TorquePlus™ system
- Locking groove to help prevent slippage
- Arched surface which spreads the force over a 400% larger contact area to help prolong life
- No ribs or serrations to damage fasteners
- Allows upto 15% more torque to be applied to the fastener
- Reduces risk of fastener rounding
- Provides a better grip on worn, rounded fasteners
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1ALP7 |
| Grainger | 1ALP7 |
| Grainger | 1ALP7 |
-
UNSPSC27111713
-
Package DescriptionEACH
-
Standards/ApprovalsANSI B107.9
Recently Viewed
Proto® TorquePlus™ J1241M Anti-Slip Design Combination Wrench, Metric, 41 mm Wrench, 12 Points, 15 deg Offset, 23 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
Proto® TorquePlus™ J1241M Anti-Slip Design Combination Wrench, Metric, 41 mm Wrench, 12 Points, 15 deg Offset, 23 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
1/2" LIQUID TIGHT STRAIGHT GRIP-LEVL7902>
10" FENCE TOOLS 354878-DIAR510PH >
Klein® D2000-48-INS 2000™ Angled Head Heavy Duty Hot-Riveted Cutting Plier, 0.813 in L x 1.188 in W x 0.813 in THK Jaw Steel Jaw, 8-1/4 in OAL
These Insulated Heavy-Duty Diagonal-Cutting Pliers have durable molded insulation that is flame retardant, impact resistant and clearly marked with 1000-volt rating. The knives are heavy duty induction hardened steel that can cut ACSR, screws, nails, and most hardened wire. The high-leverage design paired with an angled head allows for increased leverage and the ability to work in confined areas.
metabo® 676120000 4-Cutter Hammer Drill Bit, 5/8 in Drill Bit, Spline Shank, 11 in D Cutting, Carbide Cutting Edge, 16 in OAL
metabo® 676120000 4-Cutter Hammer Drill Bit, 5/8 in Drill Bit, Spline Shank, 11 in D Cutting, Carbide Cutting Edge, 16 in OAL
ITM PZ05002 Bit Screwdriver, #2 Point, 2 in OAL
