ROUND BEND
3/8" X 4" #2191-BC U-BOLT PLATES-NTL222349 >
3/8" X 1-3/4" -WX4" -L U-BOLT-RED381344UB >
3/8" X 2-1/4" -WX4-1/4" -L U-BOLT-RED382144UB >
3/8" X 2-3/8" -WX5-1/4" -L U-BOLT-RED382385UB >
3/8" X 3-3/8" WX4-1/4" L U-BOLT-RED383384UB >
ROUND U-BOLT 1/2" X 6-1/2"-PRI94001 >
ROUND U-BOLT 1/2" X 7"-PRI94003 >
ROUND U-BOLT 7/16" X 6-1/2"-PRI94012 >
ROUND U-BOLT 1/2" X 8"-PRI94028 >
1/2" X 9-1/4" ROUND U-BOLT, INSIDE DIAMETER OF 2-5/8"
9/16" X 10" Round U-Bolts, Inside Diameter of 3-3/8"
5/8" X 7-1/4" Round U-Bolts
1" Standard U-Bolt (Zinc Plated)
Size Range: Size 1/2" (15mm) thru 30" (900mm) pipe
Material: Steel
Function: Recommended for support, anchor or guide of pipe.
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24.
Maximum Temperature: 750°F (399°C)
Finish: Zinc Plated
1" Standard U-Bolt (Zinc Plated)
Size Range: Size 1/2" (15mm) thru 30" (900mm) pipe
Material: Steel
Function: Recommended for support, anchor or guide of pipe.
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24.
Maximum Temperature: 750°F (399°C)
Finish: Zinc Plated
8" IPS STANDARD U-BOLT HOT DIP GALVANIZED WITH 4 HEX NUTS
The Chicago Hardware LT5 is a 1-1/2-inch pipe U-bolt, featuring a 3/8-inch thread diameter with a 2-inch width and 4-inch length. It comes zinc-plated (or hot-dip galvanized) complete with nuts.
3/8"-24 X 1-3/4" X 4-1/4" U-BOLT WITH NUTS--CARD OF 2 - REDSP01020>
1/2"-20 X 2-3/8" X 5-1/2" U-BOLT WITH NUTS--CARD OF 2 - REDSP01040>
1/2"-20 X 3" X 7" U-BOLT WITH NUTS--CARD OF 2 - REDSP01060>
9/16"-18 X 3" X 7-1/4" U-BOLT--CARD OF 2 - REDSP01080>
9/16"-18 X 3-1/2" X 8" U-BOLT WITH NUTS--CARD OF 2 - REDSP01100>
Recently Viewed
2-3/16" -ID LOW PILLOW BLOCK UNIT-MBUVPLS235 >
Gates BX78 Tri-Power® Industrial V-Belts - BX Section, 21/32 in Top Width, 1 Strand, 81.0000 in Nominal Outside Length, Cogged
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
United Abrasives-SAIT 84103 Sanding Sheet, 11 in L x 9 in W, 80 Grit, Garnet Abrasive, Paper Backing
3/4" CONVOLUTED SLIT WIRE LOOM (FT)-GVIALZC3/4 >
BBI 693380 Teks® Fully Threaded Self-Drilling Screw, #8-18, 3/4 in OAL, Pan Head, Phillips® Drive, Low Carbon Steel, Zinc CR+3, Drill Point
BBI 693380 Teks® Fully Threaded Self-Drilling Screw, #8-18, 3/4 in OAL, Pan Head, Phillips® Drive, Low Carbon Steel, Zinc CR+3, Drill Point
JASON CC81 CC SECTION DOUBLE CLASSICAL V-BELT 7/8-" WIDE, 11/16-" THICK
CC SERIES 7/8" DOUBLE SIDED HEXAGON BELT. ESPECIALLY DESIGNED FOR SERPENTINE AND REVERSING DRIVES DOUBLE V-BELTS TRANSMIT POWER FROM BOTH SIDES OF THE BELT. POLYESTER CORDS AND COTTON/POLYESTER COVER PROVIDE MAXIMUM STRENGTH AND LENGTH
-JASCC81>
