SP-01-060 1/2"-20 X 3" X 7" U-bolt With Nuts--card Of 2
1/2"-20 X 3" X 7" U-BOLT WITH NUTS--CARD OF 2 - REDSP01060>
Recently Viewed
1/2"-20 X 3" X 7" U-BOLT WITH NUTS--CARD OF 2 - REDSP01060>
Browning® 1225788 Finished Bore Change Gear Bushing, 1-1/8 in ID x 1-3/8 in OD, 2-1/2 in L, Steel
Browning® 1225788 Finished Bore Change Gear Bushing, 1-1/8 in ID x 1-3/8 in OD, 2-1/2 in L, Steel
#10 X 1" Bonded Hex Tek-3 Screws
3/8" X 1-1/4" Hex Head Zinc Lag Screws
Browning® 1020866 MVP® Variable Pitch Sheave, 1 to 2-5/8 in Bushed Bore, 10.56 in OD, 3 Grooves, 10.6 to 8.4 in Dia Pitch, 4-7/16 to 5-1/32 in W Face
MVP® sheaves are a series of angular faced center flanges which are bolted to the fixed flange mounted on the barrel. They also contain another series of angular faced flanges which are bolted to the end flange and threaded locking collar. When the threaded locking collar is turned clockwise, it moves the angular flanges closer together increasing the pitch diameter. When the collar is moved counterclockwise, the flanges are moved apart, decreasing the pitch diameter. The pitch diameter is infinite. This means the collar adjustment can be turned and stopped at any time regardless of location between the minimum and the maximum setting. When the desired diameter is obtained, the locking collar is locked by tightening screws. In contrast VL, VP, and VM sheaves are limited by half- turn or 180 deg adjustment points.
EATON 10250TM80 Standard Legend Plate With Multiple Conduit Plate, 0.1 in H x 1.6 in W, Half Round Plate, Aluminum/Die Cast Zinc, Black Field
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
