ROUND BEND
9/16"-18 X 3-1/2" X 8" U-BOLT WITH NUTS--CARD OF 2 - REDSP01100>
9/16"-18 X 3" X 7-1/4" U-BOLT--CARD OF 2 - REDSP01080>
1/2"-20 X 3" X 7" U-BOLT WITH NUTS--CARD OF 2 - REDSP01060>
1/2"-20 X 2-3/8" X 5-1/2" U-BOLT WITH NUTS--CARD OF 2 - REDSP01040>
3/8"-24 X 1-3/4" X 4-1/4" U-BOLT WITH NUTS--CARD OF 2 - REDSP01020>
The Chicago Hardware LT5 is a 1-1/2-inch pipe U-bolt, featuring a 3/8-inch thread diameter with a 2-inch width and 4-inch length. It comes zinc-plated (or hot-dip galvanized) complete with nuts.
8" IPS STANDARD U-BOLT HOT DIP GALVANIZED WITH 4 HEX NUTS
1" Standard U-Bolt (Zinc Plated)
Size Range: Size 1/2" (15mm) thru 30" (900mm) pipe
Material: Steel
Function: Recommended for support, anchor or guide of pipe.
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24.
Maximum Temperature: 750°F (399°C)
Finish: Zinc Plated
1" Standard U-Bolt (Zinc Plated)
Size Range: Size 1/2" (15mm) thru 30" (900mm) pipe
Material: Steel
Function: Recommended for support, anchor or guide of pipe.
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24.
Maximum Temperature: 750°F (399°C)
Finish: Zinc Plated
5/8" X 7-1/4" Round U-Bolts
9/16" X 10" Round U-Bolts, Inside Diameter of 3-3/8"
1/2" X 9-1/4" ROUND U-BOLT, INSIDE DIAMETER OF 2-5/8"
ROUND U-BOLT 1/2" X 8"-PRI94028 >
ROUND U-BOLT 7/16" X 6-1/2"-PRI94012 >
ROUND U-BOLT 1/2" X 7"-PRI94003 >
ROUND U-BOLT 1/2" X 6-1/2"-PRI94001 >
3/8" X 3-3/8" WX4-1/4" L U-BOLT-RED383384UB >
3/8" X 2-3/8" -WX5-1/4" -L U-BOLT-RED382385UB >
3/8" X 2-1/4" -WX4-1/4" -L U-BOLT-RED382144UB >
3/8" X 1-3/4" -WX4" -L U-BOLT-RED381344UB >
3/8" X 4" #2191-BC U-BOLT PLATES-NTL222349 >
3/8" X 3" U-BOLT PLATES-NTL222331 >
5/16" X 2" U-BOLT PLATES-NTL222323 >
#536" 5/16" X 2" X 4-1/2" U-BOLT-NTL222307 >
DP-2190-B 5/16" X 4.25" U-BOLT-NTL222299 >
Recently Viewed
Crescent® 0013C Replacement Cutterhead, For Use With 0090FC and 0090MC Center Cut Cutter, #0 Center Cut, Alloy Steel
Since 1880, Crescent H.K. Porter® has been the preeminent brand in industrial cutters with a worldwide reputation for quality, strength, and durability. The extensive line of products includes manual cutters, pneumatic cutters and accessories, designed to handle everything from light wires and brushes to heavy steel rods and bars.
Armstrong 25-332 6 Point 1" Full Polish Long Pattern Combination Wrench USA
BOX ENDS INCORPORATE A RADIUS CORNER DESIGN THAT ENGAGES THE FLATS OF THE FASTENER, NOT THE CORNERS, PROVIDING UP TO 15% -20% MORE TORQUE WHILE REDUCING FASTENER ROUNDING, ENHANCING THE TURNING OF WORK.
BOX ENDS ARE OFFSET A TRUE 15 FOR CLEARING OBSTRUCTIONS AND KNUCKLE CLEARANCE ON FLAT SURFACES.
17-MM 6-PT 1/2"-DR SOCKETS-APX17MM15>
MAXCO Inspire Series™ 50 Offset Link Cotter Pin Type, ASME/ANSI Standard Roller Chain, Single Strand, 5/8″ Pitch
5/8" 12-PT LONG BLACK COMB/WRENCH-ARS30220>
3_100x100.jpg){kind=small}
3/4" 12-PT LONG BLACK COMB/WRENCH-ARS30224>
