BBI 102114 Socket Set Screw, #10-24, 1/4 in L, Cup Point, Stainless Steel, A2 (18-8) Grade
BBI 102114 Socket Set Screw, #10-24, 1/4 in L, Cup Point, Stainless Steel, A2 (18-8) Grade
-
BrandBBI
-
Manufacturer Part Number102114
-
CountryUSA
-
Point Size0.102 in
-
Point TypeCup
-
MaterialStainless Steel
-
Thread TypeUNC
-
Measurement SystemImperial
-
GradeA2 (18-8)
-
Hardness45-53 HRC
-
Diameter - Thread Size#10-24
-
Drive Size3/32 in
-
Drive TypeHex
-
Length1/4 in
- Used against hardened shaft or where frequent adjustment are needed and where no locking point is required
-
UNSPSC31161518
-
Package Description100/CS
-
Standards/ApprovalsANSI/ASME B18.3-2002|ASTM F880/BS 2470 Class Fit 3A
-
Catalog
Recently Viewed
BBI 102114 Socket Set Screw, #10-24, 1/4 in L, Cup Point, Stainless Steel, A2 (18-8) Grade
BBI 102114 Socket Set Screw, #10-24, 1/4 in L, Cup Point, Stainless Steel, A2 (18-8) Grade
#4-AWG X 5/16"-HOLE CABLE LUG - ILSCSWS4516>
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Proto® TorquePlus™ J1730 Obstruction Box End Wrench, 9/16 x 5/8 in Wrench, 12 Points, 15 deg Offset, 5-51/64 in OAL, Half Moon Handle Bend, Alloy Steel, Polished Chrome/Satin, ASME B107.100, AS954E S3.8.1, Federal GGG-WW-636E
Browning® 767371 VE Series Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger, 2.188 in Dia Bore, 3.937 in OD, 2.813 in W, 9752 lb Dynamic/6601 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
description
Most widely used, normal-duty pillow block with high base-to-shaft centerline dimensions.
features
Powder coated epoxy cast iron housing with extended inner ring bearings
Zone hardened inner ring with 120° spacing setscrew locking with diamond faceted setscrews
Single lip contact seal
Unique land riding retainer design provides superior pocket clearance that allows for 360° grease circulation around the rolling elements resulting in better retained and utilized lubrication.
Sealmaster® exclusive lock pin & dimple for direct lubrication and anti-rotation
