Apex® 480-TX-45X Insert Bit, T45 Torx® Point, 1-1/4 in OAL, Steel
Apex® 480-TX-45X Insert Bit, T45 Torx® Point, 1-1/4 in OAL, Steel
-
BrandApex®
-
UPC697099279372
-
Manufacturer Part Number480-TX-45X
-
CountryUSA
-
Point SizeT45
-
Point TypeTorx®
-
MaterialSteel
-
Measurement SystemImperial
-
Shank Size5/16 in
-
Shank TypeTorx®
-
Overall Length1-1/4 in
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
-
UNSPSC27112814
-
Package DescriptionEACH
Recently Viewed
Apex® 480-TX-45X Insert Bit, T45 Torx® Point, 1-1/4 in OAL, Steel
10-MM X 1.50X160-MM HEX HEAD CAPSCREW-MET93110160 >
BBI 102114 Socket Set Screw, #10-24, 1/4 in L, Cup Point, Stainless Steel, A2 (18-8) Grade
BBI 102114 Socket Set Screw, #10-24, 1/4 in L, Cup Point, Stainless Steel, A2 (18-8) Grade
#4-AWG X 5/16"-HOLE CABLE LUG - ILSCSWS4516>
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Proto® TorquePlus™ J1730 Obstruction Box End Wrench, 9/16 x 5/8 in Wrench, 12 Points, 15 deg Offset, 5-51/64 in OAL, Half Moon Handle Bend, Alloy Steel, Polished Chrome/Satin, ASME B107.100, AS954E S3.8.1, Federal GGG-WW-636E
