BBI 211163 Flat Socket Cap Screw, 5/16-18, 1 in OAL, Alloy Steel, 3A Grade
BBI 211163 Flat Socket Cap Screw, 5/16-18, 1 in OAL, Alloy Steel, 3A Grade
-
BrandBBI
-
Manufacturer Part Number211163
-
CountryUSA|Canada
-
FinishPlain/Thermal Black Oxide
-
MaterialAlloy Steel
-
Material SpecificationASTM F835
-
Measurement SystemImperial
-
Grade3A
-
Diameter - Thread Size5/16-18
-
Drive Size3/16 in
-
Drive TypeHex
-
Overall Length1 in
- UNC thread
-
UNSPSC31161501
-
Package Description100/CS
-
Standards/ApprovalsASME/ANSI B18.3-2002
-
Catalog
Recently Viewed
BBI 211163 Flat Socket Cap Screw, 5/16-18, 1 in OAL, Alloy Steel, 3A Grade
Browning® 1296516 T55L Automatic Torque Limiter, 1-1/4 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Browning 27-TOOTH P-BUSH #50 CHAIN SPROCKET BRW H-50-P-27
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
3/8" X 2-1/2" SCHEDULE 80 BLACK NIPPLE-FIT3/8X21/2XHBN >
.500" X 1.250" X .250" OIL SEALS-TCM05122TC >
WATTS® FD-104P-A5 Floor Drain, 4 in Outlet, Compression Gasket Connection, 13/16 x 3-1/4 in Nickel Bronze Grid, Cast Iron Drain, Import
This Watts Drains epoxy coated, cast iron floor drain is designed for finished floor areas. It features a 5 inch round, adjustable, heel-proof, nickel bronze strainer, reversible clamping collar with primary and secondary weepholes, anchor flange and 4 inch push on connection. This item carries a medium duty load rating.
